Post your Super PI 1M Times.

[Akalank]

dear essenbe,

It certainly looks that way. You get some .35 s per loop against mine of .5 s despite the 2500K being i5 3.3GHz. Obviously, something other than processor speed (i5 vs i7?, K?, OS, ...) is at play here.
May be someone can shed light on this anomaly.

Killy.

 

[Britton30]

Ha! I beat all of you, longer in better, right?
Athlon64 X2 2.4GHz 2GB DDR 400

 

[TypeR]

Stock i5 2320

 

[essenbe]

Ha! I beat all of you, longer in better, right?
Athlon64 X2 2.4GHz 2GB DDR 400
View attachment 205604

Yep. you sure did beat us all. Congratulations. Those Athlon's are hard to beat.

 

[Akalank]

I hope BRITTON 30 sees the sarcasm in this post. Taking 39 sec for a 8 to 12 sec job!!

 

[essenbe]

I hope BRITTON 30 sees the sarcasm in this post. Taking 39 sec for a 8 to 12 sec job!!

I believe I can speak for Britton30 and say he knew very well that it was sarcastic. His post was sarcastic also. But, while you are doing the explaining, I just ran Super PI with a resource type gadget open on my desktop. It tells activity by core and also of the whole CPU. It also has installed, used and total usage of ram. During the test the max CPU usage was 13% and max ram usage was 21%. So what exactly was it testing?

 

[Britton30]

I hope BRITTON 30 sees the sarcasm in this post. Taking 39 sec for a 8 to 12 sec job!!

Yup, you just run into two sarcastic old pharts Akalank.
My PhenomII x6 "system" with a POS ASROCK board.

 

[madcratebuilder]

 

[Britton30]

No sarcasm now...

 

[Solarstarshines]

Is this decent ?

 

[Britton30]

Pretty good Tommy, see my post #27, I think I had that x6 clocked a bit above 4GHz at the time and 8GB of RAM.

 

[paulpicks21]

No sarcasm now...

View attachment 270787

Nice Gary, what speed was the CPU at?

 

[Dude]

 

[essenbe]

Here's mine. I might get it better if I worked on it, but I don't want to.

 

[Britton30]

No sarcasm now...

View attachment 270787

Nice Gary, what speed was the CPU at?

4.4GHz, RAM is 2133.

That looks fine Steve.

 

[Solarstarshines]

First score was from last night the second score is the one I just ran I changed ram times from refreshing 7ms to 3 ms as you can see it did improve my score some

 

[Britton30]

Tommy, what Command Rate is your RAM running at? If it is 2T, see if it will run with !t, it may help. 1T is more demanding of the memory controller too and may not boot if it won't work.
My Intel system won't work with 1T.

 

[Solarstarshines]

Tommy, what Command Rate is your RAM running at? If it is 2T, see if it will run with !t, it may help. 1T is more demanding of the memory controller too and may not boot if it won't work.
My Intel system won't work with 1T.

2t it won't work on 1t all the ram slots are filled it only works when you have only 2 slots that are next to each other

1 t would probably make me take out the cmos battery to reset everything

 

[essenbe]

Mine runs on 1T OK, but it won't help Super PI but slightly. I've tried it both ways. maybe a few hundredths of a second. It can vary that much either way.

 

[paulpicks21]

@4.6ghz