Slipstream Windows 7 SP1 into a Installation DVD or ISO File

How to Slipstream Windows 7 SP1 and Updates to Create a Bootable USB, Installation DVD, or ISO File​

   Information

This will show you how to slipstream Windows 7 SP1 with your retail or student copy of Windows 7 without SP1 to create a slipstream Windows 7 SP1 installation "DVD", a slipstream Windows 7 SP1 bootable "ISO file", or a slipstream Windows 7 SP1 bootable installation "USB flash drive".

This will also show you how to integrate Windows Updates into your new or previously created slipstream Windows 7 SP1 to create a new updated slipstream Windows 7 SP1 installation "DVD", a slipstream Windows 7 SP1 bootable "ISO file", or a slipstream Windows 7 SP1 bootable installation "USB flash drive".

   Warning

• You can only do this tutorial while logged in as an administrator.
• You can only use a retail copy or student copy of a Windows 7 installation DVD, bootable USB flash drive, or ISO file to create a slipstream Windows 7 SP1 with.
• You can only use a previously created slipstream Windows 7 SP1 installation DVD, bootable USB flash drive, or ISO file using this tutorial to integrate new Windows Updates to create a new updated slipstream Windows 7 SP1 installation DVD, bootable USB flash drive, or ISO file with.
• You can only create a 64-bit slipstreamed Windows 7 SP1 DVD or ISO if your current Windows 7 installation is also 64-bit.
• You can create a 32-bit slipstreamed Windows 7 SP1 DVD or ISO if your current Windows 7 installation is 32-bit or 64-bit.
• When you install Windows 7 SP1 using the slipstreamed Windows 7 SP1 DVD/ISO/USB created in this tutorial, you will not be able to uninstall SP1.

   Tip

• You cannot use a slipstream Windows 7 installation disc to do a repair install with on a currently installed Windows 7 SP1.
• You cannot use a slipstream Windows 7 installation disc to do a repair install with on a currently installed slipstream Windows 7 SP1.
• You can use a Windows 7 with SP1 installation disc (ex: Technet, MSDN, or retail) to do a repair install with on a current slipstream Windows 7 SP1 installation.

   Note

This tutorial is designed to be followed like a flow chart to help make it easier to use and select the options (ex: DVD or ISO) you want.

Here's How: 1. If you have not already, then you will need download and install the free 32-bit (x86) or 64-bit (x64) RT Seven Lite "Beta 2.6.0" for your same 32-bit or 64-bit Windows 7 installation DVD or ISO file.

   Note

Alternative RT Seven Lite Beta download link: RT Seven Lite Download - Softpedia

   Warning

At the rt7lite.com site, you will need to scroll down a bit past the RC 1.7.0 build to see the Beta 2.6.0 build download links.

This tutorial will not work using the RC 1.7.0 build.

2. Click on the RT Seven Lite shortcut on your desktop or in the Start Menu to run the program. (see screenshot below)
3. Do either step 4 or 5 for what you have to use to integrate the Windows 7 SP1 and/or Windows Updates into.

4. To Select and Use a Windows 7 Installation DVD or Bootable USB A) Insert your retail or previously slipstreamed Windows 7 installation DVD into the DVD drive and close it, OR plug in your Windows 7 bootable USB flash drive. If a AutoPlay pop-up opens, close it.

B) In RT Seven Lite, click on the Browse button, and select the Select OS path option. (see screenshot below)
NOTE: If you do not have much else running, then you may wish to change the Set priority setting to High first to help speed the slipstreaming process up some.
C) Navigate to and select your DVD drive or bootable USB flash drive with Windows 7 on it from steps 4A, and click on OK. (see screeshow below)
D) Click on OK. (see screenshot below)
E) Select your Desktop, and click on the Make New Folder button. (see screenshot below)
F) Select the New folder on the desktop, and click on OK. (see screenshot below)
G) The contents of the Windows 7 installation DVD from steps 4A and 4C will now be copied into the New folder (step 4F) on the desktop. (see screenshot below)
NOTE: This may take a few minutes to complete.
H) Go to step 6.
5. To Select and Use a Windows 7 ISO File

   Note

You could use a Windows 7 ISO file that you already created from say RT Seven Lite, or a Windows 7 w/SP1 U ISO downloaded from: Microsoft: Windows 7 Direct Download Links

A) In RT Seven Lite, click on the Browse button, and select the Select ISO file option. (see screenshot below)
NOTE: If you do not have much else running, then you may wish to change the Set priority setting to High first to help speed the slipstreaming process up some.
B) Click on the Select a ISO button. (see screenshot below)
C) Navigate to and select the Windows 7 ISO file, and click on Open. (see screenshot below)
D) Select the Extract path button. (see screenshot below)
E) Select your Desktop, and click on the Make New Folder button. (see screenshot below)
F) Select the New folder on the desktop, and click on OK. (see screenshot below)
G) Click on OK. (see screenshot below)
H) The contents of the Windows 7 ISO file from step 5C will now be extracted and copied into the New folder (step 5F) on the desktop. (see screenshot below)
NOTE: This may take only a few minutes to complete.
I) Continue on to step 6.
6. Do either step 7 or 8 below for what you want to do.

7. To Only Integrate New Windows Updates
NOTE: You would only select this option if used a previously created slipstream Windows 7 SP1 installation DVD, bootable USB flash drive, or ISO file using this tutorial in step 4 or 5 above, and only want to update it by integrating new Windows Updates. A) When finished, select (dot) the Windows 7 edition that you want to create a updated SP1 slipstream version of, and click on OK. (see screenshot below)
NOTE: When this window below opens it likes to hide behind another opened active window, so you may need to check behind them when the screenshot above (step 5H) shows it's "Status" as Loading Image.... and does not appear to be doing anything.
B) Go to step 9.
8. To Slipstream SP1 and to be able to Integrate Windows Updates
NOTE: You would select this option if you used a retail copy or student copy of a Windows 7 installation DVD, bootable USB flash drive, or ISO file that did not have SP1 slipstreamed in it in step 4 or 5 above. A) If you have not already, then you will need to download the same 32-bit (x86) or 64-bit (x64) Windows 7 SP1 EXE installation file for your same 32-bit or 64-bit Windows 7 installation DVD or ISO file at the Microsoft link below, and save it to your Desktop. Download details: Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932)


B) Right click on the downloaded windows6.1-KB976932-X64.exe or windows6.1-KB976932-X86.exe file, click on Properties, click on the General tab, and click on Unblock.
NOTE: If you do not have a Unblock button under the General tab, then the SP1 exe file is already unblocked and you can continue on to step 8C.

C) When RT Seven Lite is finished from step 4G or 5H, select (dot) only the one Windows 7 edition that you want to create a slipstream SP1 version of, check the Slipstream Service Pack box, and click on OK. (see screenshot below)
D) Click on the Browse button. (see screenshot below)
E) Navigate to and select the Windows 7 SP1 EXE installation file on your desktop from step 1, and click on Open. (see screenshot below)
F) Click on the Start button. (see screenshot below)
G) RT Seven Lite will now start preparing, integrating, and saving the SP1 (step 9) with the DVD (step 4) or ISO file (step 5). (see screenshots below)
NOTE: This will take a good while to complete depending on how fast your system is and what you have the priority level set as in step 4B.



H) When finished, click on the Proceed button. (see screenshot below)
I) RT Seven Lite will now start start loading the image. (see screenshot below)
NOTE: This will take a few minutes to complete.
J) Continue on to step 9.
9. When finished, click on the Task tab in the left pane. (see screenshot below)
10. Do either step 11 or 12 below for what you want to do.

11. To Only Slipstream SP1
NOTE: You would do this step if you did step 8 above and do not want to integrate any Windows Updates into the Slipstream Windows 7 SP1 installation DVD, bootable USB flash drive, or ISO file. A) In the Task tab, check the ISO Bootable box option, then click on the ISO-Bootable tab in the left pane. (see screenshot below)

B) Go to step 12F.
12. To Integrate Windows Updates and still be able to Slipstream SP1 (if not already)
NOTE: You would do this step if you did step 7 above and want to integrate Windows Updates into this new or previously created Slipstream Windows 7 SP1 installation DVD, bootable USB flash drive, or ISO file. A) If you have not already, then you will need to download the standalone MSU installation files for each Windows Update that you want to integrate into the slipstream, and save them to your Desktop.

B) In the Task tab in RT Seven Lite, check the Integration box and ISO Bootable box options, then click on the Integration tab in the left pane. (see screenshot below)
C) Under the Updates tab, click on the Add button. (see screenshot below)
D) Navigate to and select all of the Windows Update MSU files that you want to integrate, and click on Open. (see screenshot below)
NOTE: You can press and hold the CTRL key to select more than one random MSU file.
E) When finished adding MSU files, click on Apply. (see screenshot below)
F) Do either step 12G or 12H for what type of Slipstream Windows 7 SP1 you want.

G) To Create a Single Windows 7 SP1 Edition Slipstream

NOTE: This will create a Slipstream Windows 7 SP1 with only the one Windows 7 edition that you selected in step 7A or 8C.

• Select High priority level, select (dot) Build current image only, and click on Commit. (see screenshot below)

• Go to step 12I

H) To Create a All-in-One Windows 7 SP1 Edition Slipstream
NOTE: This will create a Slipstream Windows 7 SP1 with all Windows 7 editions that will allow you to select which one to install during installation. (see screenshot below)

• Select High priority level, select (dot) Re-build all images, and click on Commit. (see screenshot below)

• Continue on to step 12I

I) RT Seven Lite will now start integrating the Windows Updates. (see screenshot below)
NOTE: This may take from a few minutes or longer depending on how many Windows Update MSU files you added.
J) When finished, click on the ISO-Bootable tab in the left pane. (see screenshot below)
K) Continue on to step 13.
13. Do either step 14, 15, or 16 for what you would like to have your Slipstreamed Windows 7 SP1 as.

14. To Burn a Slipstream Windows 7 SP1 Installation DVD A) Insert a blank DVD (ex: DVD-R) into the DVD drive and close it. If a AutoPlay pop-up opens, close it.

B) In RT Seven Lite, select the Direct Burn drop down menu option under Mode, select the drive letter used from step 14A under Device, then click on the Direct Burn button towards the bottom right. (see screenshot below)
C) RT Seven Lite will now start creating the image. (see screenshot below)
NOTE: This will take a few minutes to complete.
D) When finished, click on OK. If a AutoPlay pop-up opens, close it. (see screenshots below)
E) You now have a slipstream Windows 7 SP1 installation DVD.

F) Go to step 17.
15. To Create a Slipstream Windows 7 SP1 ISO File A) In RT Seven Lite, select the Create Image drop down menu option under Mode, then click on the Make ISO button towards the bottom right. (see screenshot below)
B) Navigate to and select your Desktop, type in a name that you want for the ISO file, then click on the Save button. (see screenshot below)
C) When finished, click on OK. (see screenshot below)
D) You now have a slipstream Windows 7 SP1 bootable ISO file.

   Note

• You could also use this ISO file to burn and create a Slipstream Windows 7 SP1 installation DVD with.
• You could also use this ISO file to create a Slipstream Windows 7 SP1 bootable installation USB flash drive with. For how, see part 2 here: Windows 7 USB/DVD Download Tool
• You could also test or use this ISO file in a virtual machine if you like.

E) Go to step 17.
16. To Create a Slipstream Windows 7 SP1 Bootable Installation USB Flash Drive A) If you have not already, plug in your USB flash drive.
NOTE: You will need to have at least 4.5 GB free on the USB flash drive.

B) In RT Seven Lite, select the USB Bootable drop down menu option under Mode. (see screenshot below)
C) Select your USB flash drive from the drop down menu under USB Bootable. (see screenshot above)
NOTE: If there is not enough free space on the selected USB flash drive, you will get a notice telling you so. You will then need to select a larger USB flash drive. (see screenshot below)
D) Click on the USB button towards the bottom right. (see screenshot below step 16B)

E) Click on OK to format the USB flash drive. (see screenshot below)
F) RT Seven Lite will now start formating the USB flash drive and copying the files to it. (see screenshot below)
NOTE: This will take a few minutes to complete.
G) When it's finished, click on OK. (see screenshot below)
H) You now have a slipstream Windows 7 SP1 bootable installation USB flash drive.

I) Continue on to step 17.
17. Close RT Seven Lite.

18. Click on Yes to confirm closing RT Seven Lite. (see screenshot below)
19. RT Seven Lite will now clean up it's temp files before closing. (see screenshot below)
:warn:WARNING: Do not stop or interrupt RT Seven Lite from cleaning it's temp files to avoid getting this error here the next time you try and run RT Seven Lite.
20. You can now delete the New folder from step 4E or 5E and it's contents on the desktop if you like.

   Tip

You can keep your newly created slipstream Windows 7 SP1 installation DVD, bootable USB flash drive, or ISO file updated by doing this tutorial again with steps 7 and 12 to integrate any new Windows Updates released afterwards into it.

When you install Windows 7 SP1 using the slipstream Windows 7 SP1 DVD/ISO/USB created in this tutorial, you will be able to use the Windows 7 SP1 Disk Cleanup Tool (OPTION THREE at link) to delete the SP1 backup files.

That's it,
Shawn

Related Tutorials

---

• How Use the Windows 7 SP1 Disk Cleanup Tool to Recover Lost Disk Space
• How to Uninstall Windows 7 Service Pack 1 (SP1) Beta, RC, and RTM
• How to Create a Windows 7 Installation USB Key
• How to Create a Windows 7 Universal Installation Disc
• How to Create a Windows PE Disk
• How to Create a Windows 7 System Repair Disc
• How to Burn a "ISO" or "IMG" Disc Image file to a CD/DVD in Windows 7 and Windows 8
• How to make Windows Boot Manager Boot an ISO from your Hard Drive
• How to Create a Virtual Machine in Windows Virtual PC
• How to Do a Upgrade Installation with Windows 7
• How to Do a Clean Installation with Windows 7
• How to Do a Custom Installation of Windows 7
• How to Download the Standalone MSU Installer File of a Windows Update
• Windows 7 Service Pack 1 FAQs and helpful links
• How to Extract an ISO File to the Desktop
• How to Slipstream Office 2010 with Service Pack 1 (SP1)

 

[derekimo]

Kaboom... the resulting iso did not work. During setup of W7U in a VM it goes through nicely but after reboot I get a general error about something missing (damn, should have made a note of it) with no specific error code, telling me to restart the installation. Which I don't. Of course.

Something went wrong when slipping in the 153 updates. Grrr.

Have a look at this thread, you may have better success using his method,

http://www.sevenforums.com/installation-setup/282232-test-update-7-installation-media.html

 

[Coram Daes]

Yup, seems like a good alternative. The WindowsUpdateDownloader gave two errors when downloading, but only that it could not find the updates.

 

[jraju]

Hello sir,

This article is very useful and wonderful thought to help to slip stream . But I have doubts.
I am having retail dvd and when i tried to upgrade, i could not , because it informed that the system have a most recent version, than the dvd, so could not upgrade. So, i came to this forum and read the article which is exhaustive.
I have to slipstream the service pack updates for sp1 to resort to upgrade. In other words, my dvd should also contain the service pack slip streamed in to it , so that i can repair it without formatting or reinstalling altogether.
Out of the steps, in the article please say which are the steps , i have to follow . I downloaded the rti download and followed the instructions, and when i had done the loading image stage, i had a doubt, to which are all the steps to follow.
I have also downloaded the service pack updates from microsoft as per your instructions, and after that what to do to have it. You mean some windows spl.exe as done in the 1st instructions. where and how to find and further actions, Please tell me sir,
All actions after creating image for me may kindly be explained, by giving the exact number in the instructions, for which act of kindness, i will ever be grateful to you, sirs

 

[derekimo]

Hello sir,

This article is very useful and wonderful thought to help to slip stream . But I have doubts.
I am having retail dvd and when i tried to upgrade, i could not , because it informed that the system have a most recent version, than the dvd, so could not upgrade. So, i came to this forum and read the article which is exhaustive.
I have to slipstream the service pack updates for sp1 to resort to upgrade. In other words, my dvd should also contain the service pack slip streamed in to it , so that i can repair it without formatting or reinstalling altogether.
Out of the steps, in the article please say which are the steps , i have to follow . I downloaded the rti download and followed the instructions, and when i had done the loading image stage, i had a doubt, to which are all the steps to follow.
I have also downloaded the service pack updates from microsoft as per your instructions, and after that what to do to have it. You mean some windows spl.exe as done in the 1st instructions. where and how to find and further actions, Please tell me sir,
All actions after creating image for me may kindly be explained, by giving the exact number in the instructions, for which act of kindness, i will ever be grateful to you, sirs

Wouldn't it be easier to just download the Win 7 SP1 ISO from here,

Windows 7 Direct Download Links

 

[Brink]

Hello Jraju,

If you like, you could download and use a Windows 7 w/SP1 U ISO with a lot of the updates already included from: Microsoft: Windows 7 Direct Download Links

 

[jraju]

If suppose, I do not want these and to slip stream only the service pack, what should i do sir.
Moreover, some of the updates i enabled already including service pack update,which i could not delete.(there is no option in the program and features menu for this particular item) which is in the system, like security updates, should that also be slipstreamed if i want to repair my computer. I have lots of programs ,which will get erased during reinstall. So, I want to repair after slipstreaming. On the other day, you have given instructions on sfc.
My main aim is to repair the corrupted system and registry files.
If reinstall is the only option, How to reinstall the os thro installation dvd,over the existing one. when i try the upgrade, my os was shown in some other local drive than the one , ie c: It shows, the other drive G: So, should i change the path to overwrite the existing windows.Otherwise, there will be problem of installing the OS in two drives. Please advise on these points.

 

[Brink]

You could do a repair install, but you'll still most likely need the latest Windows 7 w/SP1 U ISO to create a bootable DVD/USB with to be able to do so.

 

[klempie]

I'm trying to build a Win7 SP1 slipstream without updates so I follow the steps to 11B and then 12F and then 12G. So presumably, after I click ISO-bootable on 11A, the next screen I see should be the one in 12G, but I never see it. The next screen that comes up is 15A. So the integration step is missed out apparently and I don't know if I have a Win7 ISO or Win7 + SP1 ISO. Can anyone help?

 

[Brink]

Hello Klempie, and welcome to Seven Forums.

If you just wanted a Window 7 ISO w/SP1 included, then you could just download an official one at the link below instead if you like.

Microsoft: Windows 7 Direct Download Links

 

[klempie]

LOL Thanks Brink. Quick question. If I use this SP1 iso to repair an installation that is SP1 plus later updates will there be conflicts due to the fact that I'm repairing a later "version" of SP1 (i.e. on with updates) with the no-update SP1?

 

[Brink]

LOL Thanks Brink. Quick question. If I use this SP1 iso to repair an installation that is SP1 plus later updates will there be conflicts due to the fact that I'm repairing a later "version" of SP1 (i.e. on with updates) with the no-update SP1?

In that case I'd suggest to get an ISO SP1 U version for your edition. It should work fine.

 

[klempie]

Fantastic. Downloading. Will give it a whirl.

 

[JohnMWoods]

ERROR: Please select a valid Windows 7 OS while using RT 7 Lite


Hello,


I am trying to include updates on a bootable USB stick made from an image I downloaded from Digital River (X17-59183). I've read many tutorials, including the excellent one here, but still questions remain -- especially after receiving the RT 7 Lite error referenced in the title of this thread. The error came on Step #7 of the tutorial.

1. Is it possible to do this given that my install medium is not "original"?
2. Is my downloaded image not "original" because it has already been used? Do I download it again and start over?
3. Isn't SP 1 included in the download from DRiver?
4. If it is possible, what is the optimal approach?
5. DO you think it is it even worth all of the time to download all 100+ updates individually?
   My info:
   W7 Pro/32 bit SP1
   
   Thanks for your help and please forgive my ignorance.

 

[jraju]

Hi, Brink, There is real issue in upgrading, if you have not updated your sp1 after installation, then there will be no problem in upgrading . I think
there is bound to be problem, when the system has service pack updated, and your installation dvd without it.
even some third party slip streaming advice will not work. It will create everything, but your system may altogether collapse.
I want to know, how to slip stream in this case?. You may not be able to delete service pack once installed in your hard drive. Is it correct. If you have disk clean the system service pack, then it is not possible to use it either.
How to make your computer to have only the features, to what the dvd of the operating system

 

[Brink]

ERROR: Please select a valid Windows 7 OS while using RT 7 Lite


Hello,


I am trying to include updates on a bootable USB stick made from an image I downloaded from Digital River (X17-59183). I've read many tutorials, including the excellent one here, but still questions remain -- especially after receiving the RT 7 Lite error referenced in the title of this thread. The error came on Step #7 of the tutorial.

1. Is it possible to do this given that my install medium is not "original"?
2. Is my downloaded image not "original" because it has already been used? Do I download it again and start over?
3. Isn't SP 1 included in the download from DRiver?
4. If it is possible, what is the optimal approach?
5. DO you think it is it even worth all of the time to download all 100+ updates individually?My info:
   W7 Pro/32 bit SP1
   
   Thanks for your help and please forgive my ignorance.

1. 
   
   Hello John,
   
   If you have a fast internet connection, and don't reinstall often, then personally you may be better off to just check for and install Windows Updates normally instead.
   
   You could download a SP1 U (media refresh) ISO file that includes more updates to help cut down on how many you'll have to install in Windows Update.
   
   Hope this helps,
   Shawn

 

[Brink]

Hi, Brink, There is real issue in upgrading, if you have not updated your sp1 after installation, then there will be no problem in upgrading . I think
there is bound to be problem, when the system has service pack updated, and your installation dvd without it.
even some third party slip streaming advice will not work. It will create everything, but your system may altogether collapse.
I want to know, how to slip stream in this case?. You may not be able to delete service pack once installed in your hard drive. Is it correct. If you have disk clean the system service pack, then it is not possible to use it either.
How to make your computer to have only the features, to what the dvd of the operating system

Hello Jraju,

I'm not sure I follow you. Do you mean doing a repair install when you say upgrading??

If so, then you cannot use slipstream installation media to do a repair install with. It just fails everytime.

 

[jraju]

Thank you, brink,sir,

 

[DarcX3]

Troubles

I have the rt 7 lite x64 version installed on my x64 copy of windows 7 enterprise.

Everytime I try to slipstream SP1 into the windows 7 enterprise iso, it locks up at 100%.

The little progress dots keep moving, but the buttons to continue never light up so to say. They stay grayed out.

Any suggestions?

 

[Brink]

Hello DarcX3, and welcome to Seven Forums.

If you like, you could just download am official Windows 7 Enterprise w/SP1 ISO file at the Microsoft link below instead.

Previous Versions

 

[DarcX3]

You make it too easy my friend!

I wanted to play with some of those additional features. I guess I'll download that then play with them

Thanks for making me feel like a newb!

Ant