Solved system crashes during booting

[Ashin5]

Hi, I previously had windows 7 (32 bit)... after installation it was going well...but 2 months later suddenly blue screen problem started to happen quite often... during booting
after the windows logo has been displayed my screen used to appeared black for few seconds & then a blue screen used to appear...containing several messages but i was not able to read the entire thing as it stays for a very few seconds... only one thing i managed to see was "nvlddmkm.sys" error & core dump : 100 . then my pc used to automatically restart....i have tried "Launch Startup Repair", i have tried registry clean softwares,i have also updated my graphics card's(Nvidia Geforce 210) driver... but nothing really benefitted... this problem doesn't appear always but it appears for say 6 out of 10 times during booting & when it happens after the bluescreen & reboot I've noticed gameplaying stutters.. no more smoothness... runs slowly.

initially i had 2 gb ram,recently i installed another 2 gb,so total 4gb ram currently i have... as 32 bit os doesn't detect it so i formatted my system performed a fresh installation of windows 7 64bit.... i thought a format may fix this up but i was wrong... after few days of installation the above problem has started to appear again in the same manner.....

with windows xp i've never experienced such problems..

plz tell me some proper solutions to fix this up.

 

[centaur78]

Please use this tool to update your profile specs

And then use this tool to post all the files here

 

[Ashin5]

Hi,according to your advise i've downloaded the tool "SystemInfo.exe" but whenever i've tried to install it an error message named "SystemInfo.exe - .NET Framework Initialization Error" is always being displayed,saying that "To run this application ,you first must install one of the following versions of the .NET Framework: v4.0.30319"... what should i do now????

 

[centaur78]

Well just as it say... install .Net framework V 4.0 or better 4.5

You can also use speccy as well

 

[Ashin5]

i've downloaded & run speccy and updated my system specs accordingly.... plz give me proper suggestions....

Thanks in advance...

 

[centaur78]

use this tool to post all the files here

 

[Ashin5]

well i've downloaded & run the tool .. but when i press the "GRAB ALL" button the test starts but an error msg comes as given below

the test haults
as ....

 

[centaur78]

right click on SF diag tool and run as administrator

 

[Ashin5]

So i run the test by performing one by one at a time...
1.Minidump
error is reported as "Access to the path "C:\Windows\Minidump' is denied." & the test haults..

2.Event Log
error is reported as "Could not find file 'C:\Windows\EventApp.txt' " & the test haults..

3.Update Log
the log file i'm attaching as a text file... please see it..

4.Driver List
error is "Could not find file 'C:\Windows\DriverList.txt" & the test haults.

5.Host
error is "Could not find file 'C:\Windows\system32\drivers\etc\HOSTS' " & the test haults.

6. MSINFO32
At the end of the test comes "System Information -> Access is Denied"


please tell me how to solve the blue screen issue....

thanks in advance

 

[Ashin5]

where should i click the right button? if i click the right button on the SF diagnostic tool window(picture on the right) then
nothing is happening...

 

[centaur78]

where should i click the right button? if i click the right button on the SF diagnostic tool window(picture on the right) then
nothing is happening...

As shown below

View attachment 230522

 

[Ashin5]

i did as You said

in case of HOST the previous error message that i wrote in my earlier post is still displayed and in case of others all files are shown as successfully copied...

now what should I do?

 

[centaur78]

zip the folder and upload here....

read this if you want to know how to do it

 

[Ashin5]

i want to know where shall i find the files that i need to upload ????
because i do not know where those files have been successfully copied..

 

[centaur78]

Where are you running it from ??

Ex... if you are running the SF Diag tool from your desktop.... the folder is created in your desktop....

If its in a download folder... its created there...

it is usually named as Seven forum or SF_DD_MM_YYYY

 

[Ashin5]

ok... i'm uploading it...

View attachment 230713

View attachment 230714

please see it..

the other files EventApp & EventSys have been reported as beyond the forum's limit..... & the other two "082112-22417-01.dmp" & " MSINFO32.nfo" have been reported as "Invalid File" ..... so i couldn't upload them.... if you give me your id then i'll try to mail them....


thanks in advance...

 

[Ashin5]

View attachment 230717

View attachment 230718

the other files "MSINFO32.nfo" & "082112-22417-01.dmp" have been reported as invalid file & the other two EventApp.txt & EventSys.txt have been reported as beyond the forum's limit.....

so i was unable to upload them....

if you give me your id then i'll try to mail them....

thanks in advance....

 

[centaur78]

You can go ahead and zip everything together and use put it in dropbox or skydrive and post a link here

 

[Ashin5]

Thanks for the dropbox stuff....

i'm posting the link of the zip file that i saved in my dropbox account....

https://dl.dropbox.com/u/103879384/SF_08-09-2012.zip

please check this out..

thanks ...

 

[Ashin5]

for past 3 or 4 days i have been observing that during booting after the win7 logo appears my screen is going black & it remains as it is(nothing is happening any more).... until i get annoyed & restart it again... then it boots properly & finally the desktop is coming....

this is happening everytime whenever i'm booting..... because of this everytime whenever i boot my pc i have to boot it twice.....

please give me some solution.....
thanks in advance