Solved This device can perform faster

[innovat0r]

When i plug any device to usb port say mobile device or external portable hdd - i get this popup message "This device can perform faster if connected to hi-speed usb port" and when i click on it it gives this :

This was not the case few days back, and i dont know why it suddenly started. I even formatted the disks and did a clean win 7 installation but problem still persists and the transfer speed is approximately 1mb only for any thing. After clean installation also persisted so did windows update too - and i am fully updated with drivers and its still same.

Specs :

Quad core
4 gb ddr2 ram
2.7ghz processor
1 tb hd

 

[pebbly]

Hi innovat0r, This is another problem relating to the chipset drivers reinstall the chipset drivers from here : IPMEL-Q5 or do a search on the ASUS website for the Impel-q5 mobo from your country of origin

 

[innovat0r]

Hi innovat0r, This is another problem relating to the chipset drivers reinstall the chipset drivers from here : IPMEL-Q5 or do a search on the ASUS website for the Impel-q5 mobo from your country of origin

thnx for your help, but the website you gave me is very complicated for me. can you give me a direct link for latest chipset drivers for x64 bit os. thnx in advance.

 

[pebbly]

Hi innovat0r, This is another problem relating to the chipset drivers reinstall the chipset drivers from here : IPMEL-Q5 or do a search on the ASUS website for the Impel-q5 mobo from your country of origin

thnx for your help, but the website you gave me is very complicated for me. can you give me a direct link for latest chipset drivers for x64 bit os. thnx in advance.

innovat0r, try this one http://proisk.com/?host=ftp.h1442945.stratoserver.net It,s for Vista so you may have to install it in compatibility mode

 

[innovat0r]

Hi innovat0r, This is another problem relating to the chipset drivers reinstall the chipset drivers from here : IPMEL-Q5 or do a search on the ASUS website for the Impel-q5 mobo from your country of origin

thnx for your help, but the website you gave me is very complicated for me. can you give me a direct link for latest chipset drivers for x64 bit os. thnx in advance.

innovat0r, try this one http://proisk.com/?host=ftp.h1442945.stratoserver.net It,s for Vista so you may have to install it in compatibility mode

Thnx i have installed the chipset drivers, but unfortunately it didnt make any difference ... any other solutions?

Update: On my system the file transfer is approx 1mbps. I tried on another which is p4 only and on that its going around 30mpbs and i got quadcore and its just too lazy.

 

[pebbly]

Try this driver here Download Intel USB 3.0 Driver 1.0.4.220 for Windows 7 Driver for Windows 7 / Windows 7 x64 - Softpedia

 

[innovat0r]

Try this driver here Download Intel USB 3.0 Driver 1.0.4.220 for Windows 7 Driver for Windows 7 / Windows 7 x64 - Softpedia

The file that you are trying to download has either been moved, renamed or archived.


any other source?

update : i googled to "http://www.techspot.com/drivers/driver/file/download/16198/" -- hope its same.

update 2 : tried installing above drivers but error came up with message "this computer does not meet the minimum requirements for installing the software"

Also i think this is for usb 3.0 ports -- and i dont have 3.0 port. I got 2.0 usb ports only.

 

[innovat0r]

I found latest chipset drivers which are of 2012 year, my old drivers were of 2008, but when i update the drivers it just goes to finish status immediately without actually getting updated, just as if the drivers are already there.

 

[pebbly]

I found latest chipset drivers which are of 2012 year, my old drivers were of 2008, but when i update the drivers it just goes to finish status immediately without actually getting updated, just as if the drivers are already there.

Have you installed these in compatibility mode and are the drivers digitally signed

 

[innovat0r]

I found latest chipset drivers which are of 2012 year, my old drivers were of 2008, but when i update the drivers it just goes to finish status immediately without actually getting updated, just as if the drivers are already there.

Have you installed these in compatibility mode and are the drivers digitally signed

yes, i did as you said - it goes as if the drivers are already installed and comes the finish option only.

 

[innovat0r]

Issue resolved it was in bios - i changed legacy usb support to enable and changed usb speed from full speed to hi speed - this resolved the issue. Thx "pebbly" for your kind help.