Windows 7 64bit BSOD

[newbie1234]

I think it will help let me know

I have changed the cable.. It has improved.. No errors on the ATAPI. Also when i load my files or play video files from that IDE drive its loading smoothly..

But I found 2 more errors.

Session "Microsoft-Windows-Setup" stopped due to the following error: 0xC000000D Evend ID : 3

The NVIDIA Display Driver Service service has reported an invalid current state 32. Event ID : 7016

I think for the display driver im going to reinstall it again.. As for the Windows Setup how can i get it done?

 

[computersplus]

get OCCT or VMT graphics hardware stress test and check your video card after installing the most current Nvidia driver

the MS setup error I am working on I will have an answer shortly

 

[computersplus]

MS Error

that MS error may be tied to a failed driver install

 

[newbie1234]

get OCCT or VMT graphics hardware stress test and check your video card after installing the most current Nvidia driver

the MS setup error I am working on I will have an answer shortly

Thank you so much to all of you guys whom are striving so hard to render help for me.. Really pleased and touch by your actions.. I just cant get Win 7 to work properly before i can start moving over my files etc and get on with my work..

 

[computersplus]

Glad to Help

hey glad to help sorry you have been having issues but everything can usually be traced down

it's just tuff doing when you don't have the machine in front of you if i had your machine in front of me I would have all your problems solved in no time.

 

[computersplus]

Setup error

not sure on that setup error but my guess was driver or an update file did not complete install you might try running windows update and see what it finds for updates check the update history and see if there were any failed updates

 

[newbie1234]

Guys I tried installing my Graphics driver i downloaded from the MSI site.

I went choose Win7_Vista64 to install on my comp but the setup is not running saying The Nvidia Setup

 

[newbie1234]

Guys I tried installing my Graphics driver i downloaded from the MSI site.

I went choose Win7_Vista64 to install on my comp but the setup is not running saying The Nvidia Setup program could not locate any drivers that are compatible with your current hardware.

I do not get it.. How can it not be compatible? Or should i be using Win7_Vista32 drivers? I tried and it say im on Win 7 64bit so i cant use that..

Im really confused here?

 

[computersplus]

Video Card

is that video card a 9600GT

 

[newbie1234]

is that video card a 9600GT

MIne is a Geforce N210. I manage to get the driver installed after i restarted m PC.. but that Session "Microsoft-Windows-Setup" stopped due to the following error: 0xC000000D is still there..

The Nvidia error is gone.. No more after i done my driver installation.

So how can i solve this windows-setup error?

 

[computersplus]

Driver

here is Nvidia 64 bit driver for that right from Nvidia

NVIDIA DRIVERS 195.62 WHQL

I am not sure on that last error that could be anything I am still mulling that one right now like I said try MS update and see

 

[newbie1234]

It crashed again.. The Win32k.sys

*************************************************************
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 18441

Additional information about the problem:
BCCode: 50
BCP1: FFFFF2018444B140
BCP2: 0000000000000000
BCP3: FFFFF960000DF787
BCP4: 0000000000000007
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\010410-22854-01.dmp
C:\Users\Santa\AppData\Local\Temp\WER-34335-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Highlights - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

 

[computersplus]

Memory

you said your ram passed memtest I think you have some bad ram test the machine with one stick of ram at a time and see if you get any errors

 

[zigzag3143]

It crashed again.. The Win32k.sys

*************************************************************
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 18441

Additional information about the problem:
BCCode: 50
BCP1: FFFFF2018444B140
BCP2: 0000000000000000
BCP3: FFFFF960000DF787
BCP4: 0000000000000007
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\010410-22854-01.dmp
C:\Users\Santa\AppData\Local\Temp\WER-34335-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Highlights - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Hi

We need the actual dmp file use these to find and upload it to us. http://www.sevenforums.com/crash-lockup-debug-how/34900-1-novice-how-ask-help-bsod-problem.html

thanks

Ken J+

 

[newbie1234]

@Pauly

I have run the MemTest until 17Passes. So how should i carry on from here on sir?

 

[Wishmaster]

you stated you have 4 sticks of RAM at 2GB each = 8Gb, correct?
what speed are they rated for and what are they set at?

Im sorry if i missed it, but what CPU -motherboard/chipset are you running?

MEMTEST passing for 17 full passes should be a good indication the RAM itself is good.

However, when the system is up and running with everything working together, it can still cause errors.
MEMTEST is just telling you the RAM itself is good.

With 4 slots full, this drastically increases the load on the NB, and the CPU. it also depends greatly on what speed/voltage you have the RAM set to ATM.
(hence memory related BSODS) Every board is different however, some will have np with all slots full, others will depending what type of RAm it is.

Depending on the type of board/CPU/Chipset you have ... you may need to make a couple adjustments in the bios to compensate for the additional load.

i'll look back over the thread, i may have missed something and be way off here ...

 

[newbie1234]

you stated you have 4 sticks of RAM at 2GB each = 8Gb, correct?
what speed are they rated for and what are they set at?

Im sorry if i missed it, but what CPU -motherboard/chipset are you running?

MEMTEST passing for 17 full passes should be a good indication the RAM itself is good.

However, when the system is up and running with everything working together, it can still cause errors.

With 4 slots full, this drastically increases the load on the NB, and the CPU. it also depends greatly on what speed/voltage you have the RAM set to ATM.
(hence memory related BSODS) Every board is different however, some will have np with all slots full, others will depending what type of RAm it is.

Depending on the type of board/CPU/Chipset you have ... you may need to make a couple adjustments in the bios to compensate for the additional load.

i'll look back over the thread, i may have missed something and be way off here ...

Motherboard : MSI P45-C51
RAM : x4 - 2GB Team Elite Ram DDR 1333

I will log on back to my Bios to verify on the speeds it has been set..

Will get back to you shortly Pauly..

 

[Wishmaster]

Sorry, just seen that all on the very 1st post. Was looking at you Specs
Please update it for us


Yes, please verify that the voltage and timings both are set to what is recommended for 1333 speeds.
Your board says it supports DDR3 800/1066/1333 .. Please bear in mind this does not always mean it can support DDR3 1333 with all 4 slots full. These generally are refering to 2 slots/4GB .... But not always .. depends on board.


To find out if there's a issue with the board being able to run all 4 slots at that speed,
Go into your bios, and lower the DRAM speed to DDR3 1066 or DDR3 800. leave timings and voltages the same for now.

If the issues go away, we can go from there. Have you ran IBT or OOCT or any other form of stress test? not counting the MEMTEST

 

[newbie1234]

Sorry, just seen that all on the very 1st post. Was looking at you Specs
Please update it for us


Yes, please verify that the voltage and timings both are set to what is recommended for 1333 speeds.
Your board says it supports DDR3 800/1066/1333 .. Please bear in mind this does not always mean it can support DDR3 1333 with all 4 slots full. These generally are refering to 2 slots/4GB .... But not always .. depends on board.


To find out if there's a issue with the board being able to run all 4 slots at that speed,
Go into your bios, and lower the DRAM speed to DDR3 1066 or DDR3 800. leave timings and voltages the same for now.

If the issues go away, we can go from there. Have you ran IBT or OOCT or any other form of stress test? not counting the MEMTEST

I think i saw my DRAM Timing mode = Auto. I might go in and try test it out and see.

Also just to find out should i leave my FSB/DRAM Ratio to Auto, since there are a few settings for it - 1.1.50, 1.1.20, 1.1.60, 1.2.00, 1.1.00, 1.1.33?

I have not run the IBT and OOCT. Could you provide me with the links. Thanks

 

[newbie1234]

I do not know why My Service Conrtrol Manager error is popping out again in Event Viewer : The NVIDIA Display Driver Service service has reported an invalid current state 32.