Windows 7 dont boot in CD

[Skrip]

Hello!!! I have a Pc with the following Specs
-AMD Athlon™64 Processor x2 2.7 ghz
-2gb of ram( Dual Channel)
-an onboard nvidia graphics card with 256 memory
-...
I had a problem with my XP x86, and wanted to install windows 7 x86 ... so i boot from the disk and after the windows 7 loader appears the windows 7 default background and stucks there .... for some minutes and then appears a blue screen saying :
A problem has been detected and windows has been shut down to prevent damage to your computer
...Stop 0x0000007f (0x00000008, 0x801FA000, 0x00000000, 0x00000000)
(Tried with two windows 7 Disk that boots Ok at other Computer... And tried a windows Vista and got the same , but with linux live cd its work ok ... and with the windows xp boots ok :/ :/ )
Then i inserted windows xp CD and booted there ... then i press R for recovery ... and formated C: there ... when it finished i tried to boot from windows 7x86 cd but happed again the same .... what can be the reason ????

 

[roy69]

General causes of "STOP 0x0000007F" errors

Have you looked here?

 

[Skrip]

yes...but if it a hardware problem ... why the windows XP are Booting Good and Installing ??? and windows 7 or Vista can even Boot from the CD ...??? cant understand that

 

[roy69]

List your system spec.

 

[Skrip]

i posted some in the first post you want more detailed ??? ... i cant get them now because i havent installed any OS on the computer is there any way to get them with a boot usb or something like that ?... or i will install windows xp to get a list of them and send them to you .. :/

 

[gregrocker]

Run the Win7 Upgrade Advisor in XP: Free Download PC Upgrade Advisor Windows 7 Hardware Programs Issues

Make sure you have the latest BIOS update from the Support Downloads webpage for your computer model. If so, reset the CMOS: Clear CMOS - 3 Ways To Clear the CMOS - Reset BIOS

While in BIOS setup make sure SATA controller is set to AHCI to try install.

Next wipe the XP HD first before trying install, or try install to another HD which you wipe first: http://www.sevenforums.com/tutorials/91339-ssd-hdd-optimize-windows-reinstallation.html

 

[Skrip]

ok will try that ...

 

[Skrip]

Mainboard : Unspecified N68PV-GS
Chipset : nVidia GeForce 7050 PV
Processor : AMD Athlon 64 X2 5200+ @ 2700MHz
Physical Memory : 2048MB (1 x 2048 DDR2-SDRAM )
Hard Disk : Hitachi HDP725016GLA380 (160GB)
DVD-Rom Drive : HL-DT-ST DVD-ROM DH16NS10
Network Card : Nvidia MCP67 Ethernet
Operating System : Microsoft Windows XP Professional 5.01.2600 Service Pack 3 (32-bit)
DirectX : Version 9.0c

Mainboard:
Manufacturer : To Be Filled By O.E.M.
Mainboard : Unspecified N68PV-GS
Bios : American Megatrends Inc.
Chipset : nVidia GeForce 7050 PV
Physical Memory : 2048MB DDR2-SDRAM
LPC bus : Yes
PCI Bus : Yes
Bus PCI-Express : Yes
USB Bus : Yes
SMBus/i2c Bus : Yes
Bus HyperTransport : Yes
Bus QPI : No
Bus CardBus : No
Bus FireWire : No

Processor:
Processor : AMD Athlon 64 X2 5200+
Frequency : 2700MHz - (current : 2710.12MHz)
Number of Core : 2
Support : Socket AM2 (940)
Cache L1 : 2 x 128KB
Cache L2 : 2 x 512KB
Voltage VID : 1.300 V
FPU Coprocessor : Present
Core 1 Activity : 1%
Core 2 Activity : 0%

 

[Skrip]

I did all that you said ... And nothing happed ...The advisor says that only windows aero cant be run ... do you have any other ideas ... ( if no can you tell me please where can i find Ukrainian Mui Language for Windows Xp Sp3 )

 

[Ponmayilal]

I wouldn't question whether all the Windows7 Media that you have tried are genuine or not but go on to suggest that it is time for you to straight away install the Integrated Windows7 SP1 by downloading the appropriate ISO for the version you have a valid Product Key. Go through this thread to help you out on this.

(What I have understood is that the media you used did boot and install went upto a certain stage - may be till the first Windows 7 screen appearance - whereupon it failed and to that extent your title is misleading. "Windows 7 fails to install" may perhaps be more appropriate. Sorry if I have misunderstood anything.

Did you try on another HD as Gregrocker suggested? Try both SATA as IDE/default setting (my suggestion) and AHCI in bios setup (Gregrocker's suggestion).If it fails to install on a new HD too, then I would certainly say that something is wrong with all the Windows7 media that you are trying. This is fortified by the fact that you are able to install Windows XP, which may be genuine.)

 

[Skrip]

Thanks for answer ...But The pc from i am writing from i have installed the windows 7 that i am trying to install on the other computer and it not even boot in the cd !!!

 

[theog]

First check for all the Win XP drivers for your hardware.
If your Win XP CD, does not support your Sata Controller, you will need to load drivers to uses at F6.
Load Sata Controller drivers with a floppy disk is the best way.
http://www.sevenforums.com/tutorials/66010-sata-drivers-load-windows-xp-setup-dual-boot.html
OR
http://www.sevenforums.com/tutorials/72185-sata-drivers-slipstream-into-windows-xp-cd.html

 

[theog]

You download WinXP drivers for AsRock N68PV-GS from here:
ASRock > Products > Motherboard > N68PV-GS > Download
or
You may find them on the driver CD.

 

[Skrip]

Thanks Guys ... but i finally installed XP sp3.. and did not managed to boot even in the Windows 7 DvD ... and dont understand the reason.. :S

 

[theog]

Go to Method two,Step 6 in this tutorial:
http://www.sevenforums.com/tutorials/8057-dual-boot-installation-windows-7-xp.html?ltr=D