Windows Boot manager error 0xc000000f

[S0n0fAnarchy]

Ok here is the deal most of you have probably seen this before but i think whats happening to me is different
I Factory reset my dads pc and as far as i know everything went correctly its a Acer Aspire 5517. my problem is when i start it it shows the acer logo and then goes straight to this


Windows failed to start. A recent hardware or software change might be the cause. To fix this problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."

If you do not have this disc, contact your system administrator or computer manufacturer for assistance.

Status: 0xc000000f

Info: Windows failed to load because the NLS data is missing, or corrupt.


now if i hit enter it takes me to choose an os to start OR use a tool now if i choose an os to start is just resets and takes me back to the "windows failed to start" screen and if i run the tool it does not find anything.

i used my pc to make a repair disc but when i put it into the other pc nothing happens and yes i changed the load order in Bios to do CD/DVD first
ive been trying to fix this for 2 days and i need some help. thanks!

 

[Gator]

Welcome to Sevenforums SOA!

If you created a Repair Disc exactly as stated in this article:
Create a Windows 7 System Repair Disc ? MAXIMUMpcguides ? Windows 7 tips, tricks, help, and how-to guides

Then you can try the same method but using a USB:
http://www.sevenforums.com/tutorials/92177-boot-windows-7-system-repair-disc-usb-using-grub4dos.html

 

[jpchint]

Reason: Boot Manager is corrupted due to recently installed software or hardware drivers.

1.Perform A Startup Repair. If It dosent help the issue,

2.Restore the system with the backup created earlier.If the backup is not created previously,

3.Reinstall windows with windows installation disc or through usb drive through windows 7 usb/dvd download tool.

 

[S0n0fAnarchy]

another error

i tried restoring it again and it went through the process and now it says restore failed error code 1117 the request could not be performed because of an I/O device error

 

[Gator]

Hello again SOA.

Could you try testing the Hard Drive? Sounds like it could possibly be the problem.
http://www.sevenforums.com/tutorials/313457-seatools-dos-windows-how-use.html

 

[S0n0fAnarchy]

ill try that

 

[S0n0fAnarchy]

how do i use seatools once its on the pc like i ran it but then what

 

[S0n0fAnarchy]

After ive done everything

i finally decided im going to re install windows and hope for the best well the problem is is that the hard disk is failing that was the problem the whole time and i just now figured it out