Wireless Problems

[smooth1212]

Still no Wireless......Anyone have any other suggestions?

Is they any information that I have not supplied that will help with the trouble shooting?

I think I have tried everything. Its still funny that the same wireless card and router work great together in adifferent part of my hard drive in the XP pro OS.


I'm going to bring my notebook to work today and at lunch time I will try and find a wireless starbarks or mcdonalds and try to log into there wireless. If i can perhaps its a netgear CG814WG router problem.

Is there a way to contact windows 7 team to let them know of my problem?

 

[zillaamer7F]

I m really tired!
Here r some pics of my Problem!
[img=http://img266.imageshack.us/img266/1679/mainox8.th.jpg]
My Router Main Page!
[img=http://img4.imageshack.us/img4/6633/activeclienttablewu2.th.jpg]
Active Client Table(Although DWA110 is not connected according to Win7.. Router shows it as connected Client with the mac address 00:21:91.....
[img=http://img10.imageshack.us/img10/975/waninterfaceqd3.th.jpg]
Main WAN interface Page!
[img=http://img266.imageshack.us/img266/4193/wirelessadvancesettingsfn4.th.jpg]
Wireless aadvance Setting!
[img=http://img266.imageshack.us/img266/7646/wirelessbasicsettingsvm6.th.jpg]
Wireless Basic Settings!
[img=http://img3.imageshack.us/img3/355/zaqgk1.th.png]
My DWA-110 Wireless Manager Page!
Could some one be help here?
Waiting!!!!!!!!!!!!!!!!!!

 

[P4cha]

I´m having the same problems. I did instal my sis wireless adapter normaly with 64x driver and it shows me the router but I cannot connect on it. I have Vista on this computer and it can connect normally. Wired connections work just fine.

HELP

 

[zillaamer7F]

Detailed Windows Generated Report!

Windows Network Diagnostics Publisher details

Issues found
Wireless connectivity issueWireless connectivity issue
Your wireless adapter or network appears to be experiencing a problem. Detected
Reset your wireless router Failed
Refer to Windows Help and Support for more information about wireless connectivity problems Succeeded
Reset the wireless adapter Not Run


Issues found Detection details

6 Wireless connectivity issue Detected

Your wireless adapter or network appears to be experiencing a problem.
Reset your wireless router Failed

Contact your network administrator if you do not have access to the router. If you are on a home network, reset your wireless router or access point: 1. Unplug or turn off your router. 2. Wait at least 10 seconds. 3. Turn it on or plug it back into the power outlet.
Refer to Windows Help and Support for more information about wireless connectivity problems Succeeded

Windows cannot resolve your wireless connectivity issue.
Reset the wireless adapter Not Run



Detection details

Diagnostics Information (Network Adapter)
Details about network adapter diagnosis:

Network adapter Wireless Network Connection driver information:

Description . . . . . . . . . . : D-Link AirPlus G DWL-G122 Wireless USB Adapter(rev.C)
Manufacturer . . . . . . . . . : D-Link
Provider . . . . . . . . . . . : D-Link
Version . . . . . . . . . . . : 3.0.5.0
Inf File Name . . . . . . . . . : C:\WINDOWS\INF\oem1.inf
Inf File Date . . . . . . . . . : Monday, May 21, 2007 2:42:48 AM
Section Name . . . . . . . . . : D-Link.ndi
Hardware ID . . . . . . . . . . : usb\vid_07d1&pid_3c03
Instance Status Flags . . . . . : 0x180600a
Device Manager Status Code . . : 0
IfType . . . . . . . . . . . . : 71
Physical Media Type . . . . . . : 9



Diagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:

Information for connection being diagnosed
Interface GUID: 6f5854c2-db90-4ab3-980d-c1aea284e2bd
Interface name: D-Link AirPlus G DWL-G122 Wireless USB Adapter(rev.C)
Interface type: Native WiFi
Profile: Discovery connection
SSID: WG
SSID length: 2
Connection mode: Infra
Security: No
Connect even if network is not broadcasting: No

Connection incident diagnosed
Auto Configuration ID: 1
Connection ID: 1

Connection status summary
Connection started at: 2009-02-05 20:38:30-934
Profile match: Success
Pre-Association: Success
Association: Fail
Security and Authentication: Not started

List of visible access point(s): 1 item(s) total, 1 item(s) displayed
BSSID BSS Type PHY Signal(dB) Chnl/freq SSID
-------------------------------------------------------------------------
00-C0-CA-17-A7-C8 Infra g -26 1 WG

Connection History

Information for Auto Configuration ID 2

List of visible networks: 1 item(s) total, 1 item(s) displayed
BSS Type PHY Security Signal(RSSI) Compatible SSID
------------------------------------------------------------------------------
Infra g No 100 Yes WG

List of preferred networks: 2 item(s)
Profile: home
SSID: home
SSID length: 4
Connection mode: Infra
Security: No
Set by group policy: No
Connect even if network is not broadcasting: No
Connectable: No
Reason: 0x00028001
Profile: abc
SSID: abc
SSID length: 3
Connection mode: Infra
Security: Yes
Set by group policy: No
Connect even if network is not broadcasting: No
Connectable: No
Reason: 0x00028002

Information for Auto Configuration ID 1

List of visible networks: 1 item(s) total, 1 item(s) displayed
BSS Type PHY Security Signal(RSSI) Compatible SSID
------------------------------------------------------------------------------
Infra g No 100 Yes WG

List of preferred networks: 2 item(s)
Profile: home
SSID: home
SSID length: 4
Connection mode: Infra
Security: No
Set by group policy: No
Connect even if network is not broadcasting: No
Connectable: No
Reason: 0x00028001
Profile: abc
SSID: abc
SSID length: 3
Connection mode: Infra
Security: Yes
Set by group policy: No
Connect even if network is not broadcasting: No
Connectable: No
Reason: 0x00028002

Information for Connection ID 1
Connection started at: 2009-02-05 20:38:30-934
Auto Configuration ID: 1
Profile: Discovery connection
SSID: WG
SSID length: 2
Connection mode: Infra
Security: No
Pre-Association and Association
Connectivity settings provided by hardware manufacturer (IHV): No
Security settings provided by hardware manufacturer (IHV): No
Profile matches network requirements: Success
Pre-association status: Success
Association status: Fail 0x00038002
Association reason code: 0x00030001




Diagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:

For complete information about this session see the wireless connectivity information event.

Helper Class: Auto Configuration
Initialize status: Success

Information for connection being diagnosed
Interface GUID: 6f5854c2-db90-4ab3-980d-c1aea284e2bd
Interface name: D-Link AirPlus G DWL-G122 Wireless USB Adapter(rev.C)
Interface type: Native WiFi
Profile: Discovery connection
SSID: WG
SSID length: 2
Connection mode: Infra
Security: No
Connect even if network is not broadcasting: No

Result of diagnosis: Problem found
Issue referred to: RNWF MSM Helper Class

Root cause:
Windows could not connect to "WG"
You can try to connect again.

Repair option:
Reset the wireless adapter




Diagnostics Information (Wireless Network Adapter)
Details about wireless network adapter diagnosis:

For complete information about this session see the wireless connectivity information event.

Helper Class: Native WiFi MSM
Initialize status: Success

Information for connection being diagnosed
Interface GUID: 6f5854c2-db90-4ab3-980d-c1aea284e2bd
Interface name: D-Link AirPlus G DWL-G122 Wireless USB Adapter(rev.C)
Interface type: Native WiFi
Profile: Discovery connection
SSID: WG
SSID length: 2
Connection mode: Infra
Security: No
Connect even if network is not broadcasting: No

Result of diagnosis: Problem found

Root cause:
Wireless association to "WG" failed for an unknown reason

Detailed root cause:
802.11 connection failed due to status code 1: unspecified failure

Repair option:
Try connecting to "WG" again
If the problem continues, try resetting the access point, or contact the network administrator or your hardware manufacturer for further assistance.




Network Diagnostics Log
File Name: 57DC7BBC-901C-48C9-905E-EA5A3CB944B7.Diagnose.0.etl

Other Networking Configuration and Logs
File Name: NetworkConfiguration.cab

Collection information
Computer Name: AAMER-PC
Windows Version: 6.1
Architecture: x86
Time: Thursday, February 05, 2009 20:38:37

Publisher details

Windows Network Diagnostics
Detects problems with network connectivity.
Package Version: 6.1.7000.0
Publisher: Microsoft Windows

 

[smooth1212]

Not sound arrogant .....but what the @@@@ does the above tell me!

 

[NosferatuX]

Hi again wireless fans,

Let's do another round of troubleshooting
I understand that everyone is feeling frustrated on this issue, don't give up. We can do this

Lemme give out some important points to consider when troubleshooting wireless issues for proper isolation;

ALL Firewalls should be turned off (Windows firewall and Third-party)
ALL Antivirus software should be turned off
ALL Programs, especially the ones that tries to connect to the internet should also be turned off/closed
It is very ideal to have a line of sight between the router and the wireless adapter
If possible, temporarily turn off other wireless devices within the vicinity as this might cause interference (i.e. Wireless Telephones, Headsets, etc.)
It is also advisable to have no other clients access/connect to the wireless router.

Finally, disconnect your ethernet cable plugged in to your computer before attempting to connect to the wireless network. Windows always prioritizes ethernet connection over wireless, unless the ethernet adapter is disabled making you unable to utilize your wireless connection.

If the Wireless Router and Wireless Adapter has been established to be working properly using a different platform, it points to configuration issues. Of which needs to be adjusted, is the purpose of the above isolation steps.

Note: If your wireless adapter came with it's own Wireless Connection Manager, please make sure it is disabled as well before following the troubleshooting guide.

I'd urge everyone to try the Wireless Troubleshooting steps outlined in this post after doing the isolation steps above.

Please let me know of your progress so we can take it from there.

 

[NosferatuX]

I m really tired!
Here r some pics of my Problem!

Could some one be help here?
Waiting!!!!!!!!!!!!!!!!!!

Thank you for the images. It will be very helpful.

Detailed Windows Generated Report!

Windows Network Diagnostics Publisher details

Issues found
Wireless connectivity issueWireless connectivity issue
Your wireless adapter or network appears to be experiencing a problem. Detected
Reset your wireless router Failed
Refer to Windows Help and Support for more information about wireless connectivity problems Succeeded
Reset the wireless adapter Not Run


Issues found Detection details

6 Wireless connectivity issue Detected

Your wireless adapter or network appears to be experiencing a problem.
Reset your wireless router Failed

Contact your network administrator if you do not have access to the router. If you are on a home network, reset your wireless router or access point: 1. Unplug or turn off your router. 2. Wait at least 10 seconds. 3. Turn it on or plug it back into the power outlet.
Refer to Windows Help and Support for more information about wireless connectivity problems Succeeded

Windows cannot resolve your wireless connectivity issue.
Reset the wireless adapter Not Run

Not sound arrogant .....but what the @@@@ does the above tell me!

This points to either a router misconfiguration, inaccessible wireless channel, signal interference, etc.

 

[smooth1212]

Nosferatux, I've tried everything you suggested. Perhaps you have time you could review my screen shots (above in the this chain) and or if you are a east cost person you could remote access my notebook tonight after work.

 

[zillaamer7F]

^Smooth
It was for the NOSFERAtux.... May be he or anyone else be able to understand the Problem....
Still waiting for any solution! Nothing helped so for!

 

[NosferatuX]

Nosferatux, I've tried everything you suggested. Perhaps you have time you could review my screen shots (above in the this chain) and or if you are a east cost person you could remote access my notebook tonight after work.

I'd be very interested for a remote session. I might sign out in about 2-3 hours though. Will let you know when I'm available and we could take a look at your puppy.

 

[NosferatuX]

^Smooth
It was for the NOSFERAtux.... May be he or anyone else be able to understand the Problem....
Still waiting for any solution! Nothing helped so for!

Please try the isolation steps I just posted a bit earlier then followed by the wireless troubleshooting.

When you get to the part where you reset your wireless router settings, in the channel it says FCC (1-11), I'd suggest picking either channels 6, 9 or 11 instead of the full range.

Let us know how it progresses

 

[smooth1212]

Hey Nosferatux

Today at lunch I went over to Starbucks. Fired up win7 and accessed the tmoble site without any problems. I surfed the starbucks site learned all about coffee and then went to the ATT comercial link and learned all about ATT. So.........

Would this mean that my problem is with my netgear routor only??? Its a netgear CG814wg. I went to the neatgear website but was unable to locate a vist driver or any other type driver for this cable modem. Any suggestions?

I'll be home at 7 pm local east cost time (washington DC) if you want to remote access my machine. Perhaps you can email me at [email protected] to further discuss

 

[NosferatuX]

That is great news smooth1212!

Now we know that there's no problem with your wireless adapter and your computer configurations

You've graduated to Router configuration/compatibility issue

There are only two pages available for the Netgear CG814WG

54 MBPS WIRELESS CABLE MODEM GATEWAY CG814WG and
CG814WG or CG814WT or CG814WCOM Cable Modem Gateway
The reference to the CG814M model leads only to a USB driver for Win98/ME

Obviously, they've discontinued this model and didn't publish any firmware update.

Your best shot now is to do a router reset and pick a different channel.
If that doesn't work, we can safely conclude that your router is not compatible with Windows 7.

Please do let me know how you want to proceed from this point

 

[smooth1212]

Thanks for you Help NosferatuX!


How do I change channels on the router..........

 

[NosferatuX]

Thanks for you Help NosferatuX!


How do I change channels on the router..........

You're most welcome

This will be a bit easy than the wireless stuff

Connect your computer to the router via Ethernet cable
Open a command prompt and type ipconfig
Remember the IP of the default gateway
Open IE, in the address bar, type http://<default gateway ip>
You will be prompted for a user name and password
If you've reset the router, your default credentials are as follows
User name: admin
Password: password (or 1234 for older models) source
Go to Wireless Settings

The channel selection should be easily accessible.

Note: Page layout may vary with your actual Netgear page

Try not to put any security settings first.

Apply your settings. Router may restart depending on model/firmware.

Disconnect your Ethernet cable
Try to connect to your wireless router

Tell me how it works out

 

[P4cha]

hey

I have changed the chanel on my router and after restart I´m still not able to connect wirelesslly to him.

router is speedport W701V and my Vista and PS3 can normally surf over wireless. but windows 7 cannot.

whats your next move.

is there any program that can test our wireless conectivity and then maybe we can paste that here?

 

[NosferatuX]

Hi P4cha and welcome to the forum!

Please read through the whole post for the complete troubleshooting steps and make sure that you've gone through them and post your progress. Thanks

 

[smooth1212]

Hey Nosferatux, before I try and reconfigure my modem. I just noticed that my xp wireless is managed by intel not windows. Do I have this option with win 7? If so how do I change?

 

[zillaamer7F]

Hi! Nosferatux
I just temporarily solved the issue!
As u can see in pic given below... Router Network Type is set to Adhoc... Now My both win7 machines connect to Router easily & I can browse the Network & Internet.
http://i42.tinypic.com/2jg6wj4.jpg
Thanks for your advice!
I will surely experiment more to rectify. But this "adhoc OK" & "else failed" really annoying!

 

[P4cha]

I did read it all and tried it too.

I have just one question. do you think that my problem can be in NAT, cuz its in working state in my router. should I try to connect to him with NAT off?