Solved Would like to have some opinions

[essenbe]

Jack, open an elevated command prompt and type in winsat mem and press enter

 

[essenbe]

Right here Jack, Windows test is crap in my opinion. there are two memtest86+ out which we use, 4.20 and 5.01. The newer one is supposedly for Intel 3rd gen and up. I've used both. If using the 5.01, press F2 when it starts to use all of your CPU sores.






RAM (memory) test:

This will require memtest on a bootable CD or USB stick.​

RAM - Test with Memtest86+​

Gary, and maybe it has something to do with my board, but 5.01 won't run right on mine. It will run 1 pass then stop. The screen stays there but the test just quits working and will do nothing. But I do like that it will use all cores on some of the tests. I have to use 4.20.

Also, Jack there are 2 tests memtest 86 and memtest86+. The one with the + is the one you want to use and the one Gary's link goes to. For usb use the usb installer version . (http://www.memtest.org/)

 

[Britton30]

Yes, the 5.01 does lock up/freeze for me too on the Sandy and Ivy bridges. It will complete to test 5 or 6 and stop.

 

[Layback Bear]

Jack, open an elevated command prompt and type in winsat mem and press enter

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Windows\System32>winsat mem
Windows System Assessment Tool
> Running: Feature Enumeration ''
> Run Time 00:00:00.00
> Running: System memory performance assessment ''
> Run Time 00:00:05.12
> Memory Performance 27091.14 MB/s
> Total Run Time 00:00:06.55

C:\Windows\System32>

 

[Layback Bear]

I finally found, downloaded, unziped, and burned memory test 5.0.
Running it now and it's on test 6 with zero errors.

 

[Layback Bear]

If it was my money and time, I would go to ASUS again through your supplier. If he is worth his salt, he'll get a new replacement for you, not someone else's return.

I agree but I don't know what he can do about it.
If Asus sends back a board all I can do is install it and go through the head aches I going through. Prove it no good and do another RMA again.

 

[Britton30]

You gave him the responsibility to get your stuff and said he's always done a great job. I certainly would not be willing to eat $300-$400 for someone else's mistake.
I did with a crap ASrock board, but I fought them for 6 months getting3, that's 3 bad boards, all different ones. I even called the numerous times and they swore they tested it. I called them liars and always take the time to tell people about how crappy they are.

Put up a fight at least. Especially with whoever said the board won't run 2400 RAM, he's wrong.

 

[Layback Bear]

I haven't given up.
Just gets annoying when I buy quality hardware that is matched to the best of my ability and it always the same problem part.
Still running PassMark MemTest86 5.0 (3:10) no errors.

 

[Britton30]

It's not memtest86+?

 

[Layback Bear]

From here. A Pro and a Free version.
Read all the info. Sounded good to me.

MemTest86 - Download now!

It's the only one I found that would boot and run.

 

[essenbe]

Memtest86+ - Advanced Memory Diagnostic Tool

 

[Layback Bear]

Yes but that is version 5.01 that some are reporting problems with.

 

[essenbe]

Version 4.20 is right below it.

 

[Britton30]

Scroll down below the screenshots.

 

[Layback Bear]

24 GB installed and recognized.


C:\Windows\System32>winsat mem
Windows System Assessment Tool
> Running: Feature Enumeration ''
> Run Time 00:00:00.00
> Running: System memory performance assessment ''
> Run Time 00:00:05.15
> Memory Performance 50864.53 MB/s
> Total Run Time 00:00:06.52

C:\Windows\System32>

 

[Britton30]

wow! Run it again but wait about 5 minutes and run a couple more, that is very high score. You can keep the cmd window open.

 

[Layback Bear]

I never though of keeping the window open. I just cut/paste.
Could this high score have been caused by just running Mem86 rebooting and running winsat mem.
I will try what you suggest. I noticed it's a big jump from my first Winsat mem when essenbe requested it.
I'm trying to prove a point to my buddy about ram speed and motherboard/cpu specs. My ram is set at 2666/cpu 4249.71.
I will do some more testing.

 

[Layback Bear]

I'm unable to get that high score again. Now I'm at 34590 to 34719. It must of been the ram testing.
Some pictures of interest.
I sure like this cooling system.

 

[madcratebuilder]

That 50k score is really really good. Double what mine does with a amd mem controller

 

[Britton30]

This is what I meat Jack. This is the normal for this hardware, but sometimes it will go over 38,000 for no reason. I think it's some unknown glitch with the winsat command.



Your temps and voltage on CPU are very good. Why is there no label in the CPUz title bar?