Hello, bsoderrorrip. I will try to help you.
All of your recent dump files were similar
Code:
Use !analyze -v to get detailed debugging information.
BugCheck 19, {20, fffffa800ce27cf0, fffffa800ce27d50, 4060005}
*** WARNING: Unable to verify timestamp for mwac.sys
[COLOR=red]*** ERROR: Module load completed but symbols could not be loaded for mwac.sys[/COLOR]
[COLOR=red]Probably caused by : NETIO.SYS ( NETIO!NetioDereferenceNetBufferList+86 )[/COLOR]
Followup: MachineOwner
mwac is Malwarebytes Web Access Control
NETIO is the Microsoft Network I/O controller Note that both of those are network related
Code:
BugCheck 19, {20, fffffa800d883f60, fffffa800d883f80, 4020006}
*** WARNING: Unable to verify timestamp for mwac.sys
*** ERROR: Module load completed but symbols could not be loaded for mwac.sys
Probably caused by : fwpkclnt.sys ( fwpkclnt!FwpsConstructIpHeaderForTransportPacket0+20a )
Followup: MachineOwner
fwpclient is the Windows Firewall Platform kernel-mode client
Please boot into Safe Mode with Command Prompt and open an elevated command prompt ( click start, type
cmd in the search box,
right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste
sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.
see if you have internet access, if you don't boot into Safe Mode with Networking. If you have internet access please run these
Scan with Kaspersky TDSSKiller:
http://support.kaspersky.com/viruses/disinfection/5350#block1
Anti-rootkit utility TDSSKiller
ESET online scanner:
Free Virus Scan | Online Virus Scanner from ESET
Free Online Virus Scanner | ESET
Please download and install superantispyware if you can
SUPERAntiSpyware | Remove Malware | Remove Spyware - AntiMalware, AntiSpyware, AntiAdware! and run a full scan also try with Malwarebytes.
I am not sure if you can in safe mode, but please find your computer model on the HP site and download the LAN driver and wireless driver, if you have it and install them.
Please fill out your System Specs
Information
Your System Specs will help us to help you, and doing it in this manner will make them available to all helpers in every post and keep us from hunting for them. We ask that you fill them out in as much detail as possible including Desktop or Laptop, Model number if it is an OEM computer and all components with the Manufacturer and Model number if possible.
If you will go to your last post and click the 'System Specs' in the bottom left of the post, you will find a link to update your system specs. Please fill those out in as much detail as possible, making sure to click save at the bottom of the page. If you would like to know what we would like, you can click 'My System Specs' at the bottom left of this post to see mine. If you do not know what your components are, this will help you accomplish this task.
http://www.sevenforums.com/tutorials/180324-system-info-see-your-system-specs.html
Is there some reason you do not have SP1 installed? You will need it installed and all Windows Updates run and successfully installed. Did you install any new hardware or software just before this started?
