Solved BSOD on startup, error 0x0000007e

[reaper89]

Hello. Earlier today my pc just restarted, while i was browsing(youtube).Ever since windows cant load.It gets to the loading sign and it restard and then it gets to *launch repair* and *start windows normaly*.When I choose the repair it goes to the startup repair and immediately goest to BSOD, error 0x0000007e. I managed to go to safe mode but just for a couple of minutes just before the bsod jumps up again and its back to restarting whole bunch of times. I somehow managed to get to write this thread. I've attached the dump files and the Log Collector. Deffinetely could use some help. Thank you.

 

[reaper89]

Ok, now that i managed to write the main issue as quickly as possible before the error occures again here's somethin that i left out. I used have 2 hard drives. My main one is 1Tb WDC WD10PURX-64ESE. The second one is a 500gb hitachi. The second one I use only as storage, it doesnt have an OS installed. Earlier today, when the error started to happen, I disconnected it, thinking that it had somethig to do with the problem, but no use.

 

[zztemp]

as far as i can tell, you only have one drive connected on which you have 3 partitions.

Your Stopcode is : bug Check 0x50: PAGE_FAULT_IN_NONPAGED_AREA

what i would suggest is to do a check on your HDD and look for bad sectors.
You can do this from a prompt with the following command :

Run Chkdsk /f /r to detect and repair disk errors.
You must restart the system before the disk scan begins on a system partition

 

[axe0]

This is a lot occuring,
To the OP, you are running an Acer oem_slp Product ID (PID) on an ASUS board and you have a BIOS dating 2008. An oem_slp can't be installed without modifications with a BIOS dating earlier than 2009 because 2009 is the release date of Windows 7.
This makes your installation counterfeit.
Troubleshooting a counterfeit installation is useless as it is not known what has been modified to your system.
A counterfeit installation contains heavily modified code which causes the system to behave in unexpected ways.
For this reason, analyzing counterfeit systems is unreliable and most analysts won't try it.

OS Configuration:          Standalone Workstation
OS Build Type:             Multiprocessor Free
Registered Owner:          Vasko
Registered Organization:   
Product ID:                [COLOR="red"]00426-OEM-8992662-00006[/COLOR] <-- Acer PID on ASUS board.
Original Install Date:     14.2.2016 £., 20:33:20 ç.
System Boot Time:          30.3.2016 £., 21:02:54 ç.
System Manufacturer:       System manufacturer

BIOS Version:              American Megatrends Inc. 0501   , [COLOR="Red"]19.8.2008[/COLOR] £.

I recommend to install a genuine copy of Windows.
If, after you have installed a genuine copy of Windows, you still get BSOD's we'll be happy to assist you.

 

[reaper89]

The copy I'm using currently is not genuine, I couldn't get my hans on one.
You're positive that this is the reason? Fugires, the HDD is brand new.

 

[axe0]

It might not be THE reason, but it does have some effect on THE reason and a non-genuine installation prevents us from helping you.
Read the Forum Rules please.