Solved Frequent Hard Locking, Getting BSOD Messages After Boot. Please Help!

[Thunder50]

Hello everyone,
I am really at my wit's end with my pc at the moment. For about a week now it has been hard locking all the time, just at random but I do notice it happens most often when launching a game. I have tried everything I can think of. I've ran memtest which came back with no errors, ran chkdsk with no errors, ran my anti virus and it cam back clean. I just don't know what to do. I have uploaded all the info you guys hopefully need. I really need help guys. I'm totally stumped. Cheers.

 

[HonorGamer]

Hello Thunder50, Welcome to SF!

MSINFO32 Analysis:

Start Menu\Programs\Alcohol 120%	Public:Start Menu\Programs\Alcohol 120%	Public

Just Like Daemon Tools, Alcohol is also known to cause problems. Please uninstall.

Dump Analysis:

Probably caused by : [COLOR="Red"]GenuineIntel[/COLOR]
 
[COLOR="red"]WHEA_UNCORRECTABLE_ERROR[/COLOR] (124)

Looks like a hardware error. Please do the following:

BUG CHECK:

BugCheck 0x124

   Warning

Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. :warn:WARNING: The steps that follow can void your warranty!!!

For your hardware stop 0x124 crash, read through http://www.sevenforums.com/crash-lockup-debug-how/35349-stop-0x124-what-means-what-try.html and use the following hardware checks to supplement that link.

• If you are overclocking any hardware, please stop.
  
  
• If you have an SSD, make sure the following are up to date:
  • SSD firmware
  • BIOS Version
  • Chipset Drivers
  • Hard disk controller drivers/SATA drivers
  • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.
  
  
• Run all but the advanced tests with SeaTools for HDDs.
  SeaTools for Windows
  
  SeaTools for DOS​
  
  
• Monitor temperatures during the following tests.
  
  Use the following programs to monitor the temperatures.​
  • Real Temp is a good CPU temperature monitor.
  • Speccy - System Information - Free Download will monitor all hardware temperatures.
  • HWiNFO, HWiNFO32 & HWiNFO64 - Hardware Information and Analysis Tools can be inaccurate for CPU temperatures, but is a good program for GPU temperature monitoring.
  • Use FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, Burn-in Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net to test the graphics card GPU. Let it run until the GPU temperatures even out or until the GPU temperatures reach a dangerous level (you can find the max temperature for your card on either the nVidia or AMD sites; if you are not sure, ask us). The goal is to get a steady temperature, find out if the GPU is overheating, or to see if there are any artifacts present in the test itself: look for strange pixelated patterns on the screen or colors that do not look like they belong. Then use the |MG| Video Memory Stress Test 1.7.116 Download to test your graphics card memory. Let the memory test run for at least seven passes; the more the better.
    
    
  • Run http://www.sevenforums.com/tutorials/100352-hardware-stress-test-prime95.html to determine any hardware problems. Run all three tests for a few hours each. If you get errors, stop the test and post back here.
    
    
  • Follow the steps for doing CPU stress test using IntelBurnTest
  
  
• Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).
  
  For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
  1. Shut down and turn off your computer.
  2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
  3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
  4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
  Once these steps have been followed, it is safe to remove and replace components within your computer.

​

Coutesy of: writhziden

Please post back with results.

-Justin

 

[Thunder50]

Wow, thanks for the quick reply mate. A few things there for me to try. Just uninstalled Daemon Tools and will try the other suggestions and let you know how it goes.

 

[HonorGamer]

Sounds good. Just post back, and we will go from there!

-Justin

 

[Thunder50]

Ok well I think it might of been dodgy amd drivers. After doing a full clean out of the previous ones using amd's uninstall utility it seems to be much more stable now. Never had that kind of issue before so it was kinda weird. Anyways thanks for all your help mate. I'll mark this as solved but will let you know if the situation changes. Thanks.

 

[HonorGamer]

Yes Let us know immediately if the problem continues. Glad to help though!

-Justin