*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1000008E, {c0000005, 83297061, 82174a94, 0}
Probably caused by : cdd.dll ( cdd+1721 )
Followup: MachineOwner
---------
0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
KERNEL_MODE_EXCEPTION_NOT_HANDLED_M (1000008e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003. This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG. This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG. This will let us see why this breakpoint is
happening.
Arguments:
Arg1: c0000005, The exception code that was not handled
Arg2: 83297061, The address that the exception occurred at
Arg3: 82174a94, Trap Frame
Arg4: 00000000
Debugging Details:
------------------
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
nt!ExEnterCriticalRegionAndAcquireFastMutexUnsafe+1a
83297061 f00fba3000 lock btr dword ptr [eax],0
TRAP_FRAME: 82174a94 -- (.trap 0xffffffff82174a94)
ErrCode = 00000002
eax=00000000 ebx=8e35007e ecx=00000000 edx=00000001 esi=00000000 edi=85373d48
eip=83297061 esp=82174b08 ebp=82174b28 iopl=0 nv up ei ng nz na po nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010282
nt!ExEnterCriticalRegionAndAcquireFastMutexUnsafe+0x1a:
83297061 f00fba3000 lock btr dword ptr [eax],0 ds:0023:00000000=????????
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0x8E
PROCESS_NAME: rhclient.exe
CURRENT_IRQL: 0
LAST_CONTROL_TRANSFER: from 973c1721 to 83297061
STACK_TEXT:
82174b0c 973c1721 fe369240 973ca8d4 fe369240 nt!ExEnterCriticalRegionAndAcquireFastMutexUnsafe+0x1a
WARNING: Stack unwind information not available. Following frames may be wrong.
82174b28 973cb7c7 0043bfef fe369240 fe37b4d0 cdd+0x1721
82174b5c 973c1769 fe369240 82174bfc 971fea0c cdd+0xb7c7
82174b68 971fea0c fe369240 00000002 82174c20 cdd+0x1769
82174bfc 971ffe20 00000001 00000000 050511d9 win32k!SURFACE::bDeleteSurface+0x235
82174c10 9720235d 00000001 00000001 fe37b4d0 win32k!SURFREF::bDeleteSurface+0x14
82174c24 97201afd 00000d64 00000001 00000d64 win32k!vCleanupSurfaces+0x43
82174c44 971fd75a fe711920 00000000 00000000 win32k!NtGdiCloseProcess+0xc5
82174c64 9720003f fe711920 00000000 8751b510 win32k!GdiProcessCallout+0x151
82174c80 83455138 8556f520 00000000 a30672ed win32k!W32pProcessCallout+0x5d
82174cfc 8346e3af 00000000 ffffffff 0012ee20 nt!PspExitThread+0x46d
82174d24 8324f44a ffffffff 00000000 0012ee2c nt!NtTerminateProcess+0x1fa
82174d24 77626194 ffffffff 00000000 0012ee2c nt!KiFastCallEntry+0x12a
0012ee2c 00000000 00000000 00000000 00000000 0x77626194
STACK_COMMAND: kb
FOLLOWUP_IP:
cdd+1721
973c1721 ?? ???
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: cdd+1721
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: cdd
IMAGE_NAME: cdd.dll
DEBUG_FLR_IMAGE_TIMESTAMP: 0
FAILURE_BUCKET_ID: 0x8E_cdd+1721
BUCKET_ID: 0x8E_cdd+1721
Followup: MachineOwner
---------
