Solved Random BSOD - Often At Night

[GOTR]

Hey Everyone!

Recently (past several months), I am experiencing apparently random BSOD on my 3 year old PC. It sometimes happens when I am using it (anything from watching a YoutTube video to working on setting up a printer network connection), but more often happens when the machine is still running through the night; I wake up to a rebooted machine. It runs an FTP server, so I leave it running 24/7. It has been happening about once a day or two. I ran a Memtest and it found no errors.

System:
Windows 7 x64 - Upgraded From Vista x64 (The HD migrated from an older machine.)

Any suggestions would be greatly appreciated.

Thanks!

 

[yowanvista]

Run Prime 95 to test your CPU. Carefully the instructions in this tutorial: CPU - Stress Test with Prime95. Run 3 separate tests, one on each of the settings (Blend, Small FFTs, Large FFTs). Post back with your results.

The SMART Board Technologies HID Device Driver should be updated, the current version is not compatible with Windows 7. This is possibly related to a tablet Input device

Remove any ASUS hardware monitoring software such as Asus PC Probe or Smart Doctor
Uninstall IObit Smart Defrag

SMARTVHidMiniVistaAmd64.sys        fffff880`050b0000    fffff880`050b2880    0x00002880    0x47b3128a    13/02/2008 19:53:46                
SMARTMouseFilterx64.sys        fffff880`055d5000    fffff880`055dd000    0x00008000    0x47b32a27    13/02/2008 21:34:31

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000000079a7c, memory referenced
Arg2: 000000000000000d, IRQL
Arg3: 0000000000000001, bitfield :
    bit 0 : value 0 = read operation, 1 = write operation
    bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff8000328c505, address which referenced memory

Debugging Details:
------------------


WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff800034bd0e0
 0000000000079a7c 

CURRENT_IRQL:  d

FAULTING_IP: 
nt!KeAccumulateTicks+415
fffff800`0328c505 ff9090909090    call    qword ptr [rax-6F6F6F70h]

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0xA

PROCESS_NAME:  System

TRAP_FRAME:  fffff880031fd8b0 -- (.trap 0xfffff880031fd8b0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000079860 rbx=0000000000000000 rcx=0000000000000011
rdx=0000000000003cc3 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8000328c505 rsp=fffff880031fda40 rbp=0000000000000001
 r8=0000000000004852  r9=0000000000000000 r10=0000000000000e91
r11=fffff8800b696960 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz na po nc
nt!KeAccumulateTicks+0x415:
fffff800`0328c505 ff9090909090    call    qword ptr [rax-6F6F6F70h] ds:ffffffff`909828f0=????????????????
Resetting default scope

MISALIGNED_IP: 
nt!KeAccumulateTicks+415
fffff800`0328c505 ff9090909090    call    qword ptr [rax-6F6F6F70h]

LAST_CONTROL_TRANSFER:  from fffff80003284b29 to fffff800032855c0

STACK_TEXT:  
fffff880`031fd768 fffff800`03284b29 : 00000000`0000000a 00000000`00079a7c 00000000`0000000d 00000000`00000001 : nt!KeBugCheckEx
fffff880`031fd770 fffff800`032837a0 : fffff800`00000002 fffff880`031d5180 00000000`e3adf19b bffd5f77`7ee02335 : nt!KiBugCheckDispatch+0x69
fffff880`031fd8b0 fffff800`0328c505 : fffff900`c07e4002 fffff980`0b0ef000 fffff980`5ac0b000 fffff980`23f80000 : nt!KiPageFault+0x260
fffff880`031fda40 fffff800`03292498 : 00000000`00000001 00000000`00000000 00000000`00002711 fffffa80`08e95700 : nt!KeAccumulateTicks+0x415
fffff880`031fdad0 fffff800`03292221 : 00000000`00000000 fffff880`031fdb80 fffff880`031d5180 00000000`00000001 : nt!KeUpdateRunTime+0xb8
fffff880`031fdb00 fffff880`04dab9c2 : fffff800`032930ca 00000000`0038e56e fffffa80`08e957b8 00000026`558db332 : nt!KiSecondaryClockInterrupt+0x131
fffff880`031fdc98 fffff800`032930ca : 00000000`0038e56e fffffa80`08e957b8 00000026`558db332 00000026`48dad48a : intelppm+0x39c2
fffff880`031fdca0 fffff800`0328dd5c : fffff880`031d5180 fffff880`00000000 00000000`00000000 fffff800`033a5b00 : nt!PoIdle+0x53a
fffff880`031fdd80 00000000`00000000 : fffff880`031fe000 fffff880`031f8000 fffff880`031fdd40 00000000`00000000 : nt!KiIdleLoop+0x2c


STACK_COMMAND:  kb

FOLLOWUP_IP: 
intelppm+39c2
fffff880`04dab9c2 ??              ???

SYMBOL_STACK_INDEX:  6

SYMBOL_NAME:  intelppm+39c2

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: hardware

IMAGE_NAME:  hardware

DEBUG_FLR_IMAGE_TIMESTAMP:  0

FAILURE_BUCKET_ID:  X64_IP_MISALIGNED

BUCKET_ID:  X64_IP_MISALIGNED

Followup: MachineOwner
---------

 

[GOTR]

Thanks for sending me in the right direction! The SmartBoard drivers get installed with the creation software for my SmartBoard at work, so this comp is never attached to it.

When I ran Prime95, it BSOD-ed within a minute. I went in and reset the bios to default, non-overclocked anything and it was stable. Researched some other overclock settings for the i7 920 and found some that work now. The previous had worked for 3 years. I guess it just wanted a change, hehehe.

Thanks again!