Sfc /scannow error

[VistaKing]

When I run a SFC /SCANNOW inside CMD in Administrator mode . I get up to 14% and it errors out.

Note : Running inside Windows

 

[theog]

Try running a command prompt from the Windows 7 DVD or Startup up CD.

 

[NecroticisM666]

Just try and try again until it completes. I also experienced this problem before but I ran it for about 5 times and it eventually completed its scan.. It may take some time though..

 

[Hopalong X]

Just try and try again until it completes. I also experienced this problem before but I ran it for about 5 times and it eventually completed its scan.. It may take some time though..

+1

It often can not fix all errors in one pass.
I always suggest to run it at least 3-4 times or until errors are gone.
Sometimes it works.

You just leave the CMD window open when it is done with a pass and type the command again. Hit Enter.
Then again etc.

 

[VistaKing]

I ran it more then just once and it always stopped at 14% with that same error as it shows on the image.

 

[JMH]

See if these links provide you with some help.

Windows 7 Ultimate 32 Bit: Windows Resource Protection could not perform the requested operation.

http://www.sevenforums.com/performa...ws-resource-protection-could-not-perform.html

Error message "Windows Resource Protection could not perform the - Microsoft Answers

 

[VistaKing]

I ran chkdsk /r . Restarted the PC and it ran all the way up to 5 of 5 . Came with a volume is clean . Reran the sfc /scannow and got the same issue I had before where it stopped at 14% with an error ( on image )


Note: Reinstalling Windows ( or a repair install ) is the last thing I want to do. I want to see if I could fix this issue without a repair .

Added sfcdetails.txt file
By the way of the .dll files I modified for the theme I use and my version of Windows 7 Ultimate x86 SP1 .

 

[Brink]

Hello VistaKing,

Did you already try running the sfc /scannow command in a command prompt at boot like in METHOD TWO of the tutorial below?

http://www.sevenforums.com/tutorials/139810-sfc-scannow-run-command-prompt-boot.html

Hope this helps,
Shawn

 

[VistaKing]

Hey Shawn .

Long time no see. I will that later today and post back with my results.

 

[Brink]

Ok mate. Good to see you around.

 

[VistaKing]

Brink

Inserted my Windows 7 Ultimate SP1 x86 Installation disc (USB ) ran the sfc /scannow /offbootdir=d:\ /offwindir=d:\windows ( d: for me ) inside the command prompt took a little while to start and once I thought it would start I get this error message " Windows Resource Protection could not perform the requested operation "

 

[writhziden]

Brink

Inserted my Windows 7 Ultimate SP1 x86 Installation disc (USB ) ran the sfc /scannow /offbootdir=d:\ /offwindir=d:\windows ( d: for me ) inside the command prompt took a little while to start and once I thought it would start I get this error message " Windows Resource Protection could not perform the requested operation "

Just happened across this thread. Are you still having issues? Have you tried doing a sfc /verifyonly to see if that will complete?

You may also find SFC Windows Resource Protection could not perform the requested operation FIX! interesting, though I do not know if it will be helpful.

You could also see if the Microsoft Fixit Tool can repair the problem.

Does Startup Repair work?

 

[VistaKing]

Hi Writhziden ,

I am able to complete the sfc /verifyonly . I looked into your links that you gave and those aren't my issues. I am not having an issue with my start up. I could boot into Windows just fine.

 

[writhziden]

Hi Writhziden ,

I am able to complete the sfc /verifyonly . I looked into your links that you gave and those aren't my issues. I am not having an issue with my start up. I could boot into Windows just fine.

I was actually just curious to see if you received the same error trying to run the startup repair. I don't know if it would fix anything, but it might be worth a try. I know you aren't having startup issues, but I believe I read somewhere that startup repair runs sfc /scannow. I do not know if that was accurate information...

 

[VistaKing]

I will give a startup repair a shot and see what happens.

 

[writhziden]

Did you ever resolve the Windows Resource Protection problem? I've seen a few other people get this message since you during my help in Crashes and Debugging, so I am curious if you found a solution other than a clean or repair install.