Touchpad and USB does not work after fresh install

[bbaker6212]

Is there anything showing under Details> Compatible IDs

found Compatible ID's under a different section.
I2C HID Device: "ACPI\ELAN469D" Compatible Id: "ACPI\PNP0C50"



[Human Interface Devices]

[HID-compliant touch pad]
[Details: Hardware Ids]
HID\VEN_ELAN&DEV_469D&Col02
HID\ELAN469D&Col02
HID\*ELAN469D&Col02
HID\VID_04F3&UP:000D_U:0005
HID_DEVICE_UP:000D_U:0005
HID_DEVICE
[Details: Compatible Ids:]
<none>
[Matching device Id]
HID_DEVICE_UP:000D_U:0005
[Configuration Id]
input.inf:HID_DEVICE_UP:000D_U:0005,HID_Raw_Inst.NT


[I2C HID Device]
[Details: Hardware Ids:]
ACPI\VEN_ELAN&DEV_469D
ACPI\ELAN469D
*ELAN469D
[Details: Compatible Ids:]
ACPI\PNP0C50
PNP0C50
[Inf name]
hidi2c.inf
[Driver version]
10.0.16299.15
[Configuration Id]
hidi2c.inf:ACPI\PNP0C50,hidi2c_Device.NT
[Driver stack]
\Driver\mshidkmdf
\Driver\hidi2c
\Driver\ACPI



[Microsoft Input Configuration Device]
[Details: Hardware Ids:]
HID\VEN_ELAN&DEV_469D&Col03
HID\ELAN469D&Col03
HID\*ELAN469D&Col03
HID\VID_04F3&UP:000D_U:000E
HID_DEVICE_UP:000D_U:000E
HID_DEVICE
[Details: Compatible Ids:]
<none>

[Mice and other pointing devices]

[HID-compliant-mouse]
[Details: Hardware Ids:]
<same as the Microsoft Input Configuration Device>

 

[SIW2]

ACPI\PNP0C50 Device Drivers download

ftp://178.209.70.83/pub2G_2/ftp2/014594.rar

 

[bbaker6212]

ACPI\PNP0C50 Device Drivers download

ftp://178.209.70.83/pub2G_2/ftp2/014594.rar

Thanks I'll try it. Note the pic below. None of my HID devices look correct or what they were when booted in the PE.

 

[bbaker6212]

ACPI\PNP0C50 Device Drivers download

ftp://178.209.70.83/pub2G_2/ftp2/014594.rar

I ran the dpinst.exe as administrator and rebooted but nothing is different.
Is there something special I need to do? disable the existing HID devices first?

Btw, found an older Lenovo Yoga Win8 downgrading to Win7 with the same problem with touchpad with same (Compatible ID see red below): Downgrading from Win 8 and making I2C touchpad work with Windows 7 - Lenovo Community

01-21-2015 10:17 AM

Lenovo Yoga 3 Pro-1370, Intel Core M (CPU: 5Y70)

I have downgraded Lenovo Yoga 3 Pro-1370 to Windows 7-64 and its touchpad (Synaptics) is not detected by Windows at all (and not shown in Device Manager). As far as I understand, the touchpad is connected via I2C interface (not USB or PS2). I2C is handled by Windows 8 at a systemic level and very differently from Windows 7.

Lenovo does not support Windows 7 on Yoga 3 and does not provide Windows 7 drivers.

I tried different Win7 Synaptics drivers from other Lenovo models as well as generic drivers from Synaptics. No success.

What is the likelihood of making the touchpad to work with Windows 7? Will OEM drivers from other manufactures possibly work?

For Windows 8, the Yoga 3 chipset includes ‘Intel Serial I/O Driver’ which (I guess) takes care of I2C.

In Windows 8 Device Manager, there are 3 devices related to the touchpad

Touchpad itself
HID\VEN_SYNA&DEV_2B22&Col01
HID\SYNA2B22&Col01
HID\*SYNA2B22&Col01
HID_DEVICE_SYSTEM_MOUSE
HID_DEVICE_UP:0001_U:0002
HID_DEVICE
Driver: Synaptics


Intel(R) Serial IO I2C Host Controller - 9CE1
Location: on PCI Express Root Complex
Driver: 'iaLPSS_I2C.sys' (Intel)
ACPI\VEN_INT&DEV_3432&REV_0003
ACPI\VEN_INT&DEV_3432
ACPI\INT3432
*INT3432
Enumerator: ACPI
oem7.inf


I2C HID Device (on Intel(R) Serial IO I2C Host Controller - 9CE1)
ACPI\VEN_SYNA&DEV_2B22
ACPI\SYNA2B22
*SYNA2B22
Compatible Ids: ACPI\PNP0C50
HID\SYNA2B22&Col01\5&f4a3470&0&0000
HID\SYNA2B22&Col02\5&f4a3470&0&0001
Parent: ACPI\INT3432\3&11583659&0
Driver: Microsoft
Enumerator: ACPI
hidi2c.inf

 

[bbaker6212]

Boot this and check for the device id in device manager

16299_x64-v2.iso

Btw SIW2 this is a cool live-boot disk. Where'd it come from? Know how I can put my WiFi drivers on it (in it)?

 

[SIW2]

Where'd it come from? Know how I can put my WiFi drivers on it (in it)?

Yes.
1.Copy boot.wim from your usb stick sources folder to your hard drive.
2.Mount boot.wim using dism++.
3.Add the drivers.
4.Save the image.
5.Unmount the image.
Copy the updated boot.wim into the sources folder on your usb stick.

You are best using the win10 wifi drivers from your manufacturers website.

screenshots for using dism++



In addition, before saving the image ( step 4 above) I suggest:

Copy the pecmd.ini file from this zip View attachment SYSTEM32-new-pecmd-ini.zip into the mounted boot.wim Windows\System32 to replace the existing one.

Then place the two files from this zip View attachment Root-of-USB-stick.zip on the root of the usb stick.

Create a folder on the root of your usb stick called Uprograms.

MOVE these folders from your mounted boot.wim Program Files to Uprograms folder on the usb stick.



MOVE this folder from the mounted boot.wim Program Files (x86) to Uprograms folder on your usb stick



Now save the Image, then unmount the image.

 

[bbaker6212]

I ran the dpinst.exe as administrator and rebooted but nothing is different.
Is there something special I need to do? disable the existing HID devices first?

SIW2 any idea about the touchpad driver I commented on above?

 

[SIW2]

Your usb stick layout will look something like this:




Inside the Uprograms folder will be the folders you just moved ( similar to this)

 

[SIW2]

SIW2 any idea about the touchpad driver I commented on above?

You could try running the setup.exe instead of dpinst. And/or you could try uninstalling the current drivers from device manager before running setup.exe. And/or you can try installing the drivers using dism++.

 

[bbaker6212]

Yes.
1.Copy boot.wim...
...Now save the Image, then unmount the image.

Thanks for that. I did it all and the WiFi driver loads without error in the device manager.
And it sees my router but when I type in my password and click connect it doesn't do anything.
Is some part of the WLAN sofware missing from this live-USB?

 

[davelon]

I have a lenovo 330s, 14.. with windows 7, I have installed every driver missing with the help of snappy driver installer origin, but I'm unable to have the touch-pad working, I have tried and read everything without success.

I have only one driver that is missing because it's not recognized ans seem ties to the lack of support of tpm 2.0

any help ?

Dave

 

[SIW2]

to install tpm


https://www.dell.com/support/articl.../windows-7-missing-unknown-tpm-device?lang=en


There is also a hotfix for tpm2 on win7 x64 Hotfix KB2920188 for Windows 7 (64-bit) - ideapad 100-14IBD, 100-15IBD - US




for the touchpad check in bios if there is a setting for Touchpad and change it from Advanced to Basic and then save and exit

 

[SIW2]

Or disable tpm in bios. It is for bitlocker, which most people don't use.

 

[davelon]

TPM fixed with the hot fix, but touchpad still dead, and no set up into the bios whatsoever

mmmhhh...

 

[SIW2]

have you updated the bios?


Touchpad Driver (Elan, Synaptics, ALPS) for V330-15IKB, V330-15ISKWindows 7 64-bit


Lenovo V330-15IKB, V330-15ISK Laptop Windows 10 Drivers, Software | Notebook Drivers


https://download.lenovo.com/consumer/mobiles/iju003wf.exe




Try it and see if it works.

 

[SIW2]

If it doesn't work, get your device id and add it into the ETD.inf and the ETDHCF.inf under the

[ELANMfg.NTamd64] sections

 

[davelon]

this is the right laptop / link, only win 10 ... do you suggest to update the bios with this... do you think it will work ?

Lenovo Ideapad 330S-14IKB, 330S-15IKB Laptop Windows 10 Drivers, Software | Notebook Drivers

 

[davelon]

i mean, they aren't windows 7 drivers , lenovo never made them

 

[bbaker6212]

i mean, they aren't windows 7 drivers , lenovo never made them

I think he's explaining how you can try to make the V330 Win7 driver work on your 330S notebook.
Make sure you're running the latest Lenovo BIOS release.

 

[SIW2]

I think he's explaining how you can try to make the V330 Win7 driver work on your 330S notebook.
Make sure you're running the latest Lenovo BIOS release.

Correct. Officially there are no win7 drivers for HD630, but the modified inf files work, officially there are no win 7 usb3 drivers for x570 mobo/amd3000 cpu, but the modded inf files work, etc, etc.


no guarantees, but it is worth a try.