Solved BSOD on computer after motherboard upgrade

[Anthony07]

Yeah i tried installing it but it would not play so i uninstalled crysis.
And zentimo is a program that manages usb devices to properly eject them from windows also it shuts them off when ejected like windows xp used to do

 

[Anthony07]

Any ideals as to any good usb safely remove programs that work good with usb 3.0 and will shut off power to device after telling it to eject

 

[essenbe]

No, not really. I've never needed one.

 

[Anthony07]

I only use the program because windows xp would actually cut power to the drives which keeps from any data loss because if its in the middle of using drive it would not let the drive eject but when i went to windows 7 it would say ok to eject no matter if it was actually done or not

 

[essenbe]

Windows 7 will say that it cannot be ejected if it is being used by another program, if it is.

 

[Anthony07]

Ok also the lights stay on like on a flash drive it will stay lit up when i use that program it actually shuts off

 

[essenbe]

The lights only mean there is power to the port not that there is any activity going on, besides a flash drive has no cache. A hard drive has a cache, so it can still be writing after you have finished transferring programs. It could still be writing from the data stored in the cache.

 

[Anthony07]

So does the same apply to a external usb hard drive

 

[essenbe]

Supposed to. I haven't had any problems. As long as you use the safely remove icon. All of my drives are in AHCI mode, meaning, among other things, they are hot swappable. I use esata mostly and just turn them off when finished. But, it should work in any case. Windows 7 is not XP. It is much more advanced.

 

[Anthony07]

How do you know if your drive is in ahci mode

 

[essenbe]

Look at your sata controller in bios, or go to device manager and look under IDE ATA/ATAPI Controllers, you should see at the bottom a name with AHCI in it or IDE in it. That will tell you which it is set to. Don't change it or your computer won't boot. there is a way, I'll tell you how if you need to change it

 

[essenbe]

http://www.sevenforums.com/tutorials/61869-ahci-enable-windows-7-vista.html

 

[Anthony07]

I see a amd sata controller (ide mode) in the device manager

 

[Anthony07]

ok so was just viewing device manager and typing on forum with my phone computer crashed here is new ble screen i think old is there two

 

[Anthony07]

Also not sure entirely how to enable ahci in bios is that in my manual

 

[Anthony07]

It was set to ide i now changed it to ahci that should be better right?

 

[essenbe]

It should be better.

 

[essenbe]

ok so was just viewing device manager and typing on forum with my phone computer crashed here is new ble screen i think old is there two

Use !analyze -v to get detailed debugging information.
BugCheck 109, {a3a039d898495523, b3b7465eeac62479, fffff800034b07a8, 1}
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
[COLOR=red]Probably caused by : memory_corruption[/COLOR]
Followup: memory_corruption

 

[Anthony07]

Any ideals as to why its saying memory corruption i have already been down the whole testing memory road or could it be to do with the memory not being in the blue slots like profdlp suggested

 

[essenbe]

Possibly, but it could be a driver or bad memory or the video card memory.