SSD installation?

[Alexey2912]

3rd

 

[Alexey2912]

4th

 

[ignatzatsonic]

It doesn't look like the "onboard devices" area has anything relevant.

You might look in "system info" or "device info"

 

[Alexey2912]

It doesn't look like the "onboard devices" area has anything relevant.

You might look in "system info" or "device info"

In BIOS?

 

[GokAy]

It should have been inside Onboard Devices, so I guess your mainboard can't change the SATA mode. So we are pretty much done.

You should make a new thread in Drivers section for the 2x Base System Devices.

Good luck, if you have any questions, ask away.

 

[Alexey2912]

It should have been inside Onboard Devices, so I guess your mainboard can't change the SATA mode. So we are pretty much done.

You should make a new thread in Drivers section for the 2x Base System Devices.

Good luck, if you have any questions, ask away.

Thanks again for all your assistance.

You feel that it's on SATA I?

Shall post a thread in drivers section.

 

[ignatzatsonic]

It doesn't look like the "onboard devices" area has anything relevant.

You might look in "system info" or "device info"

In BIOS?

Yes, but keep your expectations low.

I think you have an OEM laptop and they aren't likely to have the options available in a home-built desktop.

 

[Alexey2912]

It doesn't look like the "onboard devices" area has anything relevant.

You might look in "system info" or "device info"

In BIOS?

Yes, but keep your expectations low.

I think you have an OEM laptop and they aren't likely to have the options available in a home-built desktop.

Yes it's a Dell XPS 171

 

[Alexey2912]

Something must be off. With SATA II, you should be seeing 200-250MB/s seq.speeds.

After you are finished with setting the partitions, you can go into BIOS and check if there is an option for setting the SATA controller to AHCI or RAID mode? If you are unsure take photographs of the BIOS pages and post here.

Don't change anything in BIOS though!

Can a pc tech install a cable for SATA settings to AHCI or RAID?

Thanks.

 

[GokAy]

Unfortunately no. ATA/AHCI/RAID is a BIOS option.

I guess laptops don't use cables for SATA connectivity.

 

[Alexey2912]

Unfortunately no. ATA/AHCI/RAID is a BIOS option.

I guess laptops don't use cables for SATA connectivity.

Thanks again my luck.

Had a word with the pc tech replied the same.......

 

[Alexey2912]

Unfortunately no. ATA/AHCI/RAID is a BIOS option.

I guess laptops don't use cables for SATA connectivity.

What should i check in my desktop's BIOS before installing the SSD here?

Thanks.

 

[GokAy]

Go into your BIOS and take a photo with your phone. And post here and lets see.

 

[Alexey2912]

Go into your BIOS and take a photo with your phone. And post here and lets see.

Any specific section?

 

[GokAy]

Take the main screen and integrated peripherals or onboard devices if these exist.

 

[Alexey2912]

Take the main screen and integrated peripherals or onboard devices if these exist.

Thanks again I shall and post.